Loading…
On larger systems with multiple <acronym>SCSI</acronym> disks or multiple <acronym>IDE</acronym> disks operating on different controllers, it is recommended that swap be configured on each drive, up to four drives. The swap partitions should be approximately the same size. The kernel can handle arbitrary sizes but internal data structures scale to 4 times the largest swap partition. Keeping the swap partitions near the same size will allow the kernel to optimally stripe swap space across disks. Large swap sizes are fine, even if swap is not used much. It might be easier to recover from a runaway program before being forced to reboot.
En sistemas más grandes con varios discos <acronym> SCSI </acronym> o varios discos <acronym> IDE </acronym> que operan en diferentes controladores, se recomienda configurar el intercambio en cada unidad, hasta cuatro unidades. Las particiones de intercambio deben tener aproximadamente el mismo tamaño. El kernel puede manejar tamaños arbitrarios, pero las estructuras de datos internas escalan a 4 veces la partición de intercambio más grande. Mantener las particiones de intercambio cerca del mismo tamaño permitirá al kernel dividir de manera óptima el espacio de intercambio entre los discos. Los tamaños de intercambio grandes están bien, incluso si el intercambio no se usa mucho. Puede ser más fácil recuperarse de un programa fuera de control antes de verse obligado a reiniciar.