2. FreeBSD Doc
  3. books_handbook
  4. Spanish
  5. Translate

Translation

(itstool) path: sect2/para

If an <acronym>IPv6</acronym> router is not available, select <guibutton>[ No ]</guibutton> and input the following addressing information in this menu:
0/1520
Context English Spanish State
Choose <acronym>IPv4</acronym> <acronym>DHCP</acronym> Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv4-dhcp' md5='__failed__'
If a <acronym>DHCP</acronym> server is not available, select <guibutton>[ No ]</guibutton> and input the following addressing information in this menu:
<acronym>IPv4</acronym> Static Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv4-static' md5='__failed__'
<literal>IP Address</literal> - The <acronym>IPv4</acronym> address assigned to this computer. The address must be unique and not already in use by another piece of equipment on the local network.
<literal>Subnet Mask</literal> - The subnet mask for the network.
<literal>Default Router</literal> - The <acronym>IP</acronym> address of the network's default gateway.
The next screen will ask if the interface should be configured for <acronym>IPv6</acronym>. If <acronym>IPv6</acronym> is available and desired, choose <guibutton>[ Yes ]</guibutton> to select it.
Choose IPv6 Networking
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv6' md5='__failed__'
<acronym>IPv6</acronym> also has two methods of configuration. StateLess Address AutoConfiguration (<acronym>SLAAC</acronym>) will automatically request the correct configuration information from a local router. Refer to <link xlink:href="http://tools.ietf.org/html/rfc4862">rfc4862</link> for more information. Static configuration requires manual entry of network information.
If an <acronym>IPv6</acronym> router is available, select <guibutton>[ Yes ]</guibutton> in the next menu to automatically configure the network interface. The installer will appear to pause for a minute or so as it finds the router and obtains the addressing information for the system.
Choose IPv6 SLAAC Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-slaac' md5='__failed__'
If an <acronym>IPv6</acronym> router is not available, select <guibutton>[ No ]</guibutton> and input the following addressing information in this menu:
IPv6 Static Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv6-static' md5='__failed__'
<literal>IPv6 Address</literal> - The <acronym>IPv6</acronym> address assigned to this computer. The address must be unique and not already in use by another piece of equipment on the local network.
<literal>Default Router</literal> - The <acronym>IPv6</acronym> address of the network's default gateway.
The last network configuration menu is used to configure the Domain Name System (<acronym>DNS</acronym>) resolver, which converts hostnames to and from network addresses. If <acronym>DHCP</acronym> or <acronym>SLAAC</acronym> was used to autoconfigure the network interface, the <literal>Resolver Configuration</literal> values may already be filled in. Otherwise, enter the local network's domain name in the <literal>Search</literal> field. <literal>DNS #1</literal> and <literal>DNS #2</literal> are the <acronym>IPv4</acronym> and/or <acronym>IPv6</acronym> addresses of the <acronym>DNS</acronym> servers. At least one <acronym>DNS</acronym> server is required.
DNS Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-ipv4-dns' md5='__failed__'
Once the interface is configured, select a mirror site that is located in the same region of the world as the computer on which FreeBSD is being installed. Files can be retrieved more quickly when the mirror is close to the target computer, reducing installation time.
Choosing a Mirror
_ external ref='bsdinstall/bsdinstall-netinstall-mirrorselect' md5='__failed__'
Troubleshooting
<primary>installation</primary> <secondary>troubleshooting</secondary>
This section covers basic installation troubleshooting, such as common problems people have reported.
Check the Hardware Notes (<link xlink:href="@@URL_RELPREFIX@@/releases/index.html">https://www.freebsd.org/releases/index.html</link>) document for the version of FreeBSD to make sure the hardware is supported. If the hardware is supported and lock-ups or other problems occur, build a custom kernel using the instructions in <xref linkend="kernelconfig"/> to add support for devices which are not present in the <filename>GENERIC</filename> kernel. The default kernel assumes that most hardware devices are in their factory default configuration in terms of <acronym>IRQ</acronym>s, <acronym>I/O</acronym> addresses, and <acronym>DMA</acronym> channels. If the hardware has been reconfigured, a custom kernel configuration file can tell FreeBSD where to find things.
Some installation problems can be avoided or alleviated by updating the firmware on various hardware components, most notably the motherboard. Motherboard firmware is usually referred to as the <acronym>BIOS</acronym>. Most motherboard and computer manufacturers have a website for upgrades and upgrade information.

Loading…

No matching activity found.

Browse all component changes

Glossary

English Spanish
No related strings found in the glossary.

Source information

Source string comment

(itstool) path: sect2/para

Source string location
book.translate.xml:5558
String age
6 months ago
Source string age
6 months ago
Translation file
books/es_ES/handbook.po, string 818