2. FreeBSD Doc
  3. books_handbook
  4. Spanish
  5. Translate

Translation

(itstool) path: listitem/para
<literal>IP Address</literal> - The <acronym>IPv4</acronym> address assigned to this computer. The address must be unique and not already in use by another piece of equipment on the local network.
0/1960
Context English Spanish State
_ external ref='bsdinstall/bsdinstall-configure-wireless-accesspoints' md5='__failed__'
Next, enter the encryption information for connecting to the selected wireless network. <acronym>WPA2</acronym> encryption is strongly recommended as older encryption types, like <acronym>WEP</acronym>, offer little security. If the network uses <acronym>WPA2</acronym>, input the password, also known as the Pre-Shared Key (<acronym>PSK</acronym>). For security reasons, the characters typed into the input box are displayed as asterisks.
WPA2 Setup
_ external ref='bsdinstall/bsdinstall-configure-wireless-wpa2setup' md5='__failed__'
Next, choose whether or not an <acronym>IPv4</acronym> address should be configured on the Ethernet or wireless interface:
Choose <acronym>IPv4</acronym> Networking
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv4' md5='__failed__'
There are two methods of <acronym>IPv4</acronym> configuration. <acronym>DHCP</acronym> will automatically configure the network interface correctly and should be used if the network provides a <acronym>DHCP</acronym> server. Otherwise, the addressing information needs to be input manually as a static configuration.
Do not enter random network information as it will not work. If a <acronym>DHCP</acronym> server is not available, obtain the information listed in <xref linkend="bsdinstall-collect-network-information"/> from the network administrator or Internet service provider.
If a <acronym>DHCP</acronym> server is available, select <guibutton>[ Yes ]</guibutton> in the next menu to automatically configure the network interface. The installer will appear to pause for a minute or so as it finds the <acronym>DHCP</acronym> server and obtains the addressing information for the system.
Choose <acronym>IPv4</acronym> <acronym>DHCP</acronym> Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv4-dhcp' md5='__failed__'
If a <acronym>DHCP</acronym> server is not available, select <guibutton>[ No ]</guibutton> and input the following addressing information in this menu:
<acronym>IPv4</acronym> Static Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv4-static' md5='__failed__'
<literal>IP Address</literal> - The <acronym>IPv4</acronym> address assigned to this computer. The address must be unique and not already in use by another piece of equipment on the local network.
<literal>Subnet Mask</literal> - The subnet mask for the network.
<literal>Default Router</literal> - The <acronym>IP</acronym> address of the network's default gateway.
The next screen will ask if the interface should be configured for <acronym>IPv6</acronym>. If <acronym>IPv6</acronym> is available and desired, choose <guibutton>[ Yes ]</guibutton> to select it.
Choose IPv6 Networking
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv6' md5='__failed__'
<acronym>IPv6</acronym> also has two methods of configuration. StateLess Address AutoConfiguration (<acronym>SLAAC</acronym>) will automatically request the correct configuration information from a local router. Refer to <link xlink:href="http://tools.ietf.org/html/rfc4862">rfc4862</link> for more information. Static configuration requires manual entry of network information.
If an <acronym>IPv6</acronym> router is available, select <guibutton>[ Yes ]</guibutton> in the next menu to automatically configure the network interface. The installer will appear to pause for a minute or so as it finds the router and obtains the addressing information for the system.
Choose IPv6 SLAAC Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-slaac' md5='__failed__'
If an <acronym>IPv6</acronym> router is not available, select <guibutton>[ No ]</guibutton> and input the following addressing information in this menu:
IPv6 Static Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv6-static' md5='__failed__'
<literal>IPv6 Address</literal> - The <acronym>IPv6</acronym> address assigned to this computer. The address must be unique and not already in use by another piece of equipment on the local network.
<literal>Default Router</literal> - The <acronym>IPv6</acronym> address of the network's default gateway.
The last network configuration menu is used to configure the Domain Name System (<acronym>DNS</acronym>) resolver, which converts hostnames to and from network addresses. If <acronym>DHCP</acronym> or <acronym>SLAAC</acronym> was used to autoconfigure the network interface, the <literal>Resolver Configuration</literal> values may already be filled in. Otherwise, enter the local network's domain name in the <literal>Search</literal> field. <literal>DNS #1</literal> and <literal>DNS #2</literal> are the <acronym>IPv4</acronym> and/or <acronym>IPv6</acronym> addresses of the <acronym>DNS</acronym> servers. At least one <acronym>DNS</acronym> server is required.

Loading…

User avatar None

New source string

FreeBSD Doc / books_handbook — Spanish

New source string a year ago
Browse all component changes

Glossary

English Spanish
No related strings found in the glossary.

Source information

Source string comment
(itstool) path: listitem/para
Source string location
book.translate.xml:5501
String age
a year ago
Source string age
a year ago
Translation file
books/es_ES/handbook.po, string 808