The translation is temporarily closed for contributions due to maintenance, please come back later.

Translation

(itstool) path: sect2/para
English
To avoid accidentally erasing the wrong disk, the <guibutton>- Disk Info</guibutton> menu can be used to inspect each disk, including its partition table and various other information such as the device model number and serial number, if available.
0/2480 · 248
Context English Persian State
Here is a summary of the <literal>Pool Type</literal> which can be selected in this menu:
<literal>stripe</literal> - Striping provides maximum storage of all connected devices, but no redundancy. If just one disk fails the data on the pool is lost irrevocably.
<literal>mirror</literal> - Mirroring stores a complete copy of all data on every disk. Mirroring provides a good read perfomance because data is read from all disks in parallel. Write performance is slower as the data must be written to all disks in the pool. Allows all but one disk to fail. This option requires at least two disks.
<literal>raid10</literal> - Striped mirrors. Provides the best performance, but the least storage. This option needs at least an even number of disks and a minimum of four disks.
<literal>raidz1</literal> - Single Redundant RAID. Allow one disk to fail concurrently. This option needs at least three disks.
<literal>raidz2</literal> - Double Redundant RAID. Allows two disks to fail concurrently. This option needs at least four disks.
<literal>raidz3</literal> - Triple Redundant RAID. Allows three disks to fail concurrently. This option needs at least five disks.
Once a <literal>Pool Type</literal> has been selected, a list of available disks is displayed, and the user is prompted to select one or more disks to make up the pool. The configuration is then validated, to ensure enough disks are selected. If not, select <guibutton>&lt;Change Selection&gt;</guibutton> to return to the list of disks, or <guibutton>&lt;Back&gt;</guibutton> to change the <literal>Pool Type</literal>.
Disk Selection
_ external ref='bsdinstall/bsdinstall-zfs-disk_select' md5='__failed__'
Invalid Selection
_ external ref='bsdinstall/bsdinstall-zfs-vdev_invalid' md5='__failed__'
If one or more disks are missing from the list, or if disks were attached after the installer was started, select <guibutton>- Rescan Devices</guibutton> to repopulate the list of available disks.
Rescan Devices
_ external ref='bsdinstall/bsdinstall-zfs-rescan-devices' md5='__failed__'
To avoid accidentally erasing the wrong disk, the <guibutton>- Disk Info</guibutton> menu can be used to inspect each disk, including its partition table and various other information such as the device model number and serial number, if available.
Analyzing a Disk
_ external ref='bsdinstall/bsdinstall-zfs-disk_info' md5='__failed__'
Select <keycap>N</keycap> to configure the <literal>Pool Name</literal>. Enter the desired name then select <guibutton>&lt;OK&gt;</guibutton> to establish it or <guibutton>&lt;Cancel&gt;</guibutton> to return to the main menu and leave the default name.
Pool Name
_ external ref='bsdinstall/bsdinstall-zfs-pool-name' md5='__failed__'
Select <keycap>S</keycap> to set the amount of swap. Enter the desired amount of swap and then select <guibutton>&lt;OK&gt;</guibutton> to establish it or <guibutton>&lt;Cancel&gt;</guibutton> to return to the main menu and let the default amount.
Swap Amount
_ external ref='bsdinstall/bsdinstall-zfs-swap-amount' md5='__failed__'
Once all options have been set to the desired values, select the <guibutton>&gt;&gt;&gt; Install</guibutton> option at the top of the menu. The installer then offers a last chance to cancel before the contents of the selected drives are destroyed to create the <acronym>ZFS</acronym> pool.
Last Chance
_ external ref='bsdinstall/bsdinstall-zfs-warning' md5='__failed__'
If <acronym>GELI</acronym> disk encryption was enabled, the installer will prompt twice for the passphrase to be used to encrypt the disks. And after that the initializing of the encryption begins.
Disk Encryption Password
_ external ref='bsdinstall/bsdinstall-zfs-geli_password' md5='__failed__'
Initializing Encryption

Loading…

No matching activity found.

Browse all component changes

Glossary

English Persian
No related strings found in the glossary.

Source information

Source string comment
(itstool) path: sect2/para
Source string location
book.translate.xml:4561
String age
10 months ago
Source string age
10 months ago
Translation file
books/fa/handbook.po, string 644