2. FreeBSD Doc
  3. books_handbook
  4. Norwegian Bokmål
  5. Translate

Translation

(itstool) path: sect2/para
After the partition layout has been created, review it to ensure it meets the needs of the installation. Selecting <guibutton>[ Revert ]</guibutton> will reset the partitions to their original values and pressing <guibutton>[ Auto ]</guibutton> will recreate the automatic FreeBSD partitions. Partitions can also be manually created, modified, or deleted. When the partitioning is correct, select <guibutton>[ Finish ]</guibutton> to continue with the installation.
0/4650
Context English Norwegian Bokmål State
On larger systems with multiple <acronym>SCSI</acronym> disks or multiple <acronym>IDE</acronym> disks operating on different controllers, it is recommended that swap be configured on each drive, up to four drives. The swap partitions should be approximately the same size. The kernel can handle arbitrary sizes but internal data structures scale to 4 times the largest swap partition. Keeping the swap partitions near the same size will allow the kernel to optimally stripe swap space across disks. Large swap sizes are fine, even if swap is not used much. It might be easier to recover from a runaway program before being forced to reboot.
By properly partitioning a system, fragmentation introduced in the smaller write heavy partitions will not bleed over into the mostly read partitions. Keeping the write loaded partitions closer to the disk's edge will increase <acronym>I/O</acronym> performance in the partitions where it occurs the most. While <acronym>I/O</acronym> performance in the larger partitions may be needed, shifting them more toward the edge of the disk will not lead to a significant performance improvement over moving <filename>/var</filename> to the edge.
Guided Partitioning Using UFS
When this method is selected, a menu will display the available disk(s). If multiple disks are connected, choose the one where FreeBSD is to be installed.
Selecting from Multiple Disks
_ external ref='bsdinstall/bsdinstall-part-guided-disk' md5='__failed__'
Once the disk is selected, the next menu prompts to install to either the entire disk or to create a partition using free space. If <guibutton>[ Entire Disk ]</guibutton> is chosen, a general partition layout filling the whole disk is automatically created. Selecting <guibutton>[ Partition ]</guibutton> creates a partition layout from the unused space on the disk.
Selecting Entire Disk or Partition
_ external ref='bsdinstall/bsdinstall-part-entire-part' md5='__failed__'
After <guibutton>[ Entire Disk ]</guibutton> is chosen <application>bsdinstall</application> displays a dialog indicating that the disk will be erased.
Confirmation
_ external ref='bsdinstall/bsdinstall-ufs-warning' md5='__failed__'
The next menu shows a list with the partition schemes types. GPT is usually the most appropriate choice for amd64 computers. Older computers that are not compatible with GPT should use MBR. The other partition schemes are generally used for uncommon or older computers. More information is available in <xref linkend="partition-schemes"/>.
Select Partition Scheme
_ external ref='bsdinstall/bsdinstall-part-manual-partscheme' md5='__failed__'
After the partition layout has been created, review it to ensure it meets the needs of the installation. Selecting <guibutton>[ Revert ]</guibutton> will reset the partitions to their original values and pressing <guibutton>[ Auto ]</guibutton> will recreate the automatic FreeBSD partitions. Partitions can also be manually created, modified, or deleted. When the partitioning is correct, select <guibutton>[ Finish ]</guibutton> to continue with the installation.
Review Created Partitions
_ external ref='bsdinstall/bsdinstall-part-review' md5='__failed__'
Once the disks are configured, the next menu provides the last chance to make changes before the selected drives are formatted. If changes need to be made, select <guibutton>[ Back ]</guibutton> to return to the main partitioning menu. <guibutton>[ Revert &amp; Exit ]</guibutton> exits the installer without making any changes to the drive. Select <guibutton>[ Commit ]</guibutton> to start the installation process.
Final Confirmation
_ external ref='bsdinstall/bsdinstall-final-confirmation' md5='__failed__'
To continue with the installation process go to <xref linkend="bsdinstall-fetching-distribution"/>.
Manual Partitioning
Selecting this method opens the partition editor:
Manually Create Partitions
_ external ref='bsdinstall/bsdinstall-part-manual-create' md5='__failed__'
Highlight the installation drive (<filename>ada0</filename> in this example) and select <guibutton>[ Create ]</guibutton> to display a menu of available partition schemes:
<acronym>GPT</acronym> is usually the most appropriate choice for amd64 computers. Older computers that are not compatible with <acronym>GPT</acronym> should use <acronym>MBR</acronym>. The other partition schemes are generally used for uncommon or older computers.
Partitioning Schemes
Abbreviation
Description

Loading…

No matching activity found.

Browse all component changes

Glossary

English Norwegian Bokmål
No related strings found in the glossary.

Source information

Source string comment
(itstool) path: sect2/para
Source string location
book.translate.xml:4052
String age
6 months ago
Source string age
9 months ago
Translation file
books/nb_NO/handbook.po, string 545