Translation

(itstool) path: sect2/para
The last network configuration menu is used to configure the Domain Name System (<acronym>DNS</acronym>) resolver, which converts hostnames to and from network addresses. If <acronym>DHCP</acronym> or <acronym>SLAAC</acronym> was used to autoconfigure the network interface, the <literal>Resolver Configuration</literal> values may already be filled in. Otherwise, enter the local network's domain name in the <literal>Search</literal> field. <literal>DNS #1</literal> and <literal>DNS #2</literal> are the <acronym>IPv4</acronym> and/or <acronym>IPv6</acronym> addresses of the <acronym>DNS</acronym> servers. At least one <acronym>DNS</acronym> server is required.
0/6660
Context English Turkish (tr_TR) State
<literal>IP Address</literal> - The <acronym>IPv4</acronym> address assigned to this computer. The address must be unique and not already in use by another piece of equipment on the local network.
<literal>Subnet Mask</literal> - The subnet mask for the network.
<literal>Default Router</literal> - The <acronym>IP</acronym> address of the network's default gateway.
The next screen will ask if the interface should be configured for <acronym>IPv6</acronym>. If <acronym>IPv6</acronym> is available and desired, choose <guibutton>[ Yes ]</guibutton> to select it.
Choose IPv6 Networking
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv6' md5='__failed__'
<acronym>IPv6</acronym> also has two methods of configuration. StateLess Address AutoConfiguration (<acronym>SLAAC</acronym>) will automatically request the correct configuration information from a local router. Refer to <link xlink:href="http://tools.ietf.org/html/rfc4862">rfc4862</link> for more information. Static configuration requires manual entry of network information.
If an <acronym>IPv6</acronym> router is available, select <guibutton>[ Yes ]</guibutton> in the next menu to automatically configure the network interface. The installer will appear to pause for a minute or so as it finds the router and obtains the addressing information for the system.
Choose IPv6 SLAAC Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-slaac' md5='__failed__'
If an <acronym>IPv6</acronym> router is not available, select <guibutton>[ No ]</guibutton> and input the following addressing information in this menu:
IPv6 Static Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv6-static' md5='__failed__'
<literal>IPv6 Address</literal> - The <acronym>IPv6</acronym> address assigned to this computer. The address must be unique and not already in use by another piece of equipment on the local network.
<literal>Default Router</literal> - The <acronym>IPv6</acronym> address of the network's default gateway.
The last network configuration menu is used to configure the Domain Name System (<acronym>DNS</acronym>) resolver, which converts hostnames to and from network addresses. If <acronym>DHCP</acronym> or <acronym>SLAAC</acronym> was used to autoconfigure the network interface, the <literal>Resolver Configuration</literal> values may already be filled in. Otherwise, enter the local network's domain name in the <literal>Search</literal> field. <literal>DNS #1</literal> and <literal>DNS #2</literal> are the <acronym>IPv4</acronym> and/or <acronym>IPv6</acronym> addresses of the <acronym>DNS</acronym> servers. At least one <acronym>DNS</acronym> server is required.
DNS Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-ipv4-dns' md5='__failed__'
Once the interface is configured, select a mirror site that is located in the same region of the world as the computer on which FreeBSD is being installed. Files can be retrieved more quickly when the mirror is close to the target computer, reducing installation time.
Choosing a Mirror
_ external ref='bsdinstall/bsdinstall-netinstall-mirrorselect' md5='__failed__'
Troubleshooting
<primary>installation</primary> <secondary>troubleshooting</secondary>
This section covers basic installation troubleshooting, such as common problems people have reported.
Check the Hardware Notes (<link xlink:href="@@URL_RELPREFIX@@/releases/index.html">https://www.freebsd.org/releases/index.html</link>) document for the version of FreeBSD to make sure the hardware is supported. If the hardware is supported and lock-ups or other problems occur, build a custom kernel using the instructions in <xref linkend="kernelconfig"/> to add support for devices which are not present in the <filename>GENERIC</filename> kernel. The default kernel assumes that most hardware devices are in their factory default configuration in terms of <acronym>IRQ</acronym>s, <acronym>I/O</acronym> addresses, and <acronym>DMA</acronym> channels. If the hardware has been reconfigured, a custom kernel configuration file can tell FreeBSD where to find things.
Some installation problems can be avoided or alleviated by updating the firmware on various hardware components, most notably the motherboard. Motherboard firmware is usually referred to as the <acronym>BIOS</acronym>. Most motherboard and computer manufacturers have a website for upgrades and upgrade information.
Manufacturers generally advise against upgrading the motherboard <acronym>BIOS</acronym> unless there is a good reason for doing so, like a critical update. The upgrade process <emphasis>can</emphasis> go wrong, leaving the <acronym>BIOS</acronym> incomplete and the computer inoperative.
If the system hangs while probing hardware during boot, or it behaves strangely during install, <acronym>ACPI</acronym> may be the culprit. FreeBSD makes extensive use of the system <acronym>ACPI</acronym> service on the i386 and amd64 platforms to aid in system configuration if it is detected during boot. Unfortunately, some bugs still exist in both the <acronym>ACPI</acronym> driver and within system motherboards and <acronym>BIOS</acronym> firmware. <acronym>ACPI</acronym> can be disabled by setting the <literal>hint.acpi.0.disabled</literal> hint in the third stage boot loader:
<userinput>set hint.acpi.0.disabled="1"</userinput>
This is reset each time the system is booted, so it is necessary to add <literal>hint.acpi.0.disabled="1"</literal> to the file <filename>/boot/loader.conf</filename>. More information about the boot loader can be found in <xref linkend="boot-synopsis"/>.
Using the Live <acronym>CD</acronym>

Loading…

No matching activity found.

Browse all component changes

Glossary

English Turkish (tr_TR)
base system temel sistem FreeBSD Doc
broadcast address yayın adresi FreeBSD Doc
configuration yapı bilgileri FreeBSD Doc
configure yapılandırmak FreeBSD Doc
dhcp istemdeki bilgisayarlara IP adreslerini ve buna ek olarak değişik parametreleri atamak için kullanılan servis FreeBSD Doc
domain etki alanı FreeBSD Doc
Extended (Ext) File System Genişletilmiş Dosya Sistemi FreeBSD Doc
file system dosya sistemi FreeBSD Doc
GNOME (GNU Network Object Model Environment) GNU Ağ Nesne Modeli Ortamı FreeBSD Doc
host system ana bilgisayar sistemi FreeBSD Doc
interface arayüz,arabirim FreeBSD Doc
internal address yerel adres FreeBSD Doc
internal network iç şebeke FreeBSD Doc
internal network yerel ağ FreeBSD Doc
IPv6 transition mechanism IPv6 geçiş mekanizması, Internet Protokolü sürüm 4 altyapısından Internet Protokolü Sürüm 6'nın ardıl adresleme ve yönlendirme sistemine geçişini kolaylaştıran teknoloji FreeBSD Doc
local yerel FreeBSD Doc
local yerel FreeBSD Doc
Local host Yerel hizmet bilgisayarı FreeBSD Doc
loopback address geri döngü adresi FreeBSD Doc
loopback interface geri döngü arayüzü FreeBSD Doc
MAC address MAC adresi FreeBSD Doc
name server ad sunucusu FreeBSD Doc
native file system yerel dosya sistemi FreeBSD Doc
network FreeBSD Doc
network card ethernet kartı,ağ kartı FreeBSD Doc
network file system ağ dosya sistemi FreeBSD Doc
network interface ağ arayüzü FreeBSD Doc
network monitoring ağ izleme FreeBSD Doc
network printer ağ yazıcısı FreeBSD Doc
network service ağ hizmeti FreeBSD Doc
operating system işletim sistemi FreeBSD Doc
path name yol adı FreeBSD Doc
raw network sockets ham ağ soketleri FreeBSD Doc
server sunucu FreeBSD Doc
super server hizmet dağıtıcı FreeBSD Doc
supported file system desteklenen dosya sistemi FreeBSD Doc
system administration Sistem Yönetimi FreeBSD Doc
system call sistem çağrısı FreeBSD Doc
system collapsing sistem çökmesi FreeBSD Doc
Virtual Private Network Sanal Özel Ağlar FreeBSD Doc

Source information

Source string comment
(itstool) path: sect2/para
Source string location
book.translate.xml:5587
String age
6 months ago
Source string age
a year ago
Translation file
books/tr_TR/handbook.po, string 823