Translation

(itstool) path: sect5/screen
English
<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
909/9090
Context English Turkish (tr_TR) State
The <literal>private_key</literal> field is the pathname to the client certificate private key file. The <literal>private_key</literal> field is the pathname to the client certificate private key file.
The <literal>private_key_passwd</literal> field contains the passphrase for the private key. <literal> private_key_passwd </literal> alanı, özel anahtarın parolasını içerir.
Then, add the following lines to <filename>/etc/rc.conf</filename>: Ardından, <filename> /etc/rc.conf </filename> öğesine aşağıdaki satırları ekleyin:
The next step is to bring up the interface: Bir sonraki adım arayüzü açmaktır:
<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL 		<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
It is also possible to bring up the interface manually using <citerefentry><refentrytitle>wpa_supplicant</refentrytitle><manvolnum>8</manvolnum></citerefentry> and <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum></citerefentry>. Arabirimi <citerefentry><refentrytitle>wpa_supplicant</refentrytitle><manvolnum>8</manvolnum> </citerefentry> ve <citerefentry><refentrytitle>ifconfig</refentry> 8 < </ manvolnum> </ citerefentry>.
<acronym>WPA</acronym> with <acronym>EAP-TTLS</acronym> <acronym>WPA</acronym> with <acronym>EAP-TTLS</acronym>
With <acronym>EAP-TLS</acronym>, both the authentication server and the client need a certificate. With <acronym>EAP-TTLS</acronym>, a client certificate is optional. This method is similar to a web server which creates a secure <acronym>SSL</acronym> tunnel even if visitors do not have client-side certificates. <acronym>EAP-TTLS</acronym> uses an encrypted <acronym>TLS</acronym> tunnel for safe transport of the authentication data. <acronym> EAP-TLS </acronym> ile, hem kimlik doğrulama sunucusunun hem de istemcinin bir sertifikaya ihtiyacı vardır. <acronym> EAP-TTLS </acronym> ile istemci sertifikası isteğe bağlıdır. Bu yöntem, ziyaretçilerin istemci tarafı sertifikaları olmasa bile güvenli bir <acronym> SSL </acronym> tüneli oluşturan bir web sunucusuna benzer. <acronym> EAP-TTLS </acronym>, kimlik doğrulama verilerinin güvenli taşınması için şifreli bir <acronym> TLS </acronym> tüneli kullanır.
The required configuration can be added to <filename>/etc/wpa_supplicant.conf</filename>: Gerekli yapılandırma <filename> /etc/wpa_supplicant.conf </filename> dosyasına eklenebilir:
network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=TTLS <co xml:id="co-ttls-eap"/>
identity="test" <co xml:id="co-ttls-id"/>
password="test" <co xml:id="co-ttls-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-ttls-cacert"/>
phase2="auth=MD5" <co xml:id="co-ttls-pha2"/>
} 		network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=TTLS <co xml:id="co-ttls-eap"/>
identity="test" <co xml:id="co-ttls-id"/>
password="test" <co xml:id="co-ttls-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-ttls-cacert"/>
phase2="auth=MD5" <co xml:id="co-ttls-pha2"/>
}
This field specifies the <acronym>EAP</acronym> method for the connection. Bu alan, bağlantı için <acronym> EAP </acronym> yöntemini belirtir.
The <literal>identity</literal> field contains the identity string for <acronym>EAP</acronym> authentication inside the encrypted <acronym>TLS</acronym> tunnel. <literal> identity </literal> alanı, şifreli <acronym> TLS </acronym> tüneli içinde <acronym> EAP </acronym> kimlik doğrulaması için kimlik dizesini içerir.
The <literal>password</literal> field contains the passphrase for the <acronym>EAP</acronym> authentication. <literal> parola </literal> alanı, <acronym> EAP </acronym> kimlik doğrulamasının parolasını içerir.
This field specifies the authentication method used in the encrypted <acronym>TLS</acronym> tunnel. In this example, <acronym>EAP</acronym> with MD5-Challenge is used. The <quote>inner authentication</quote> phase is often called <quote>phase2</quote>. Bu alan şifreli <acronym> TLS </acronym> tünelinde kullanılan kimlik doğrulama yöntemini belirtir. Bu örnekte, MD5-Challenge ile birlikte <acronym> EAP </acronym> kullanılmaktadır. <quote> iç kimlik doğrulama </quote> aşamasına genellikle <quote> phase2 </quote> adı verilir.
Next, add the following lines to <filename>/etc/rc.conf</filename>: Ardından, <filename> /etc/rc.conf </filename> öğesine aşağıdaki satırları ekleyin:
<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL 		<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
<acronym>WPA</acronym> with <acronym>EAP-PEAP</acronym> <acronym>WPA</acronym> with <acronym>EAP-PEAP</acronym>
<acronym>PEAPv0/EAP-MSCHAPv2</acronym> is the most common <acronym>PEAP</acronym> method. In this chapter, the term <acronym>PEAP</acronym> is used to refer to that method. <acronym> PEAPv0 / EAP-MSCHAPv2 </acronym> en yaygın <acronym> PEAP </acronym> yöntemidir. Bu bölümde, bu yöntemi ifade etmek için <acronym> PEAP </acronym> terimi kullanılmaktadır.
Protected EAP (<acronym>PEAP</acronym>) is designed as an alternative to <acronym>EAP-TTLS</acronym> and is the most used <acronym>EAP</acronym> standard after <acronym>EAP-TLS</acronym>. In a network with mixed operating systems, <acronym>PEAP</acronym> should be the most supported standard after <acronym>EAP-TLS</acronym>. Korumalı EAP (<acronym> PEAP </acronym>), <acronym> EAP-TTLS </acronym> 'e alternatif olarak tasarlanmıştır ve <acronym> EAP-TLS < / kısaltması>. Karışık işletim sistemlerine sahip bir ağda, <acronym> PEAP </acronym>, <acronym> EAP-TLS </acronym> 'dan sonra en çok desteklenen standart olmalıdır.
<acronym>PEAP</acronym> is similar to <acronym>EAP-TTLS</acronym> as it uses a server-side certificate to authenticate clients by creating an encrypted <acronym>TLS</acronym> tunnel between the client and the authentication server, which protects the ensuing exchange of authentication information. <acronym>PEAP</acronym> authentication differs from <acronym>EAP-TTLS</acronym> as it broadcasts the username in the clear and only the password is sent in the encrypted <acronym>TLS</acronym> tunnel. <acronym>EAP-TTLS</acronym> will use the <acronym>TLS</acronym> tunnel for both the username and password. <acronym> PEAP </acronym>, istemci ile istemci arasında şifreli bir <acronym> TLS </acronym> tüneli oluşturarak istemcilerin kimliğini doğrulamak için sunucu tarafı bir sertifika kullandığından <acronym> EAP-TTLS </acronym> 'e benzer. sonraki kimlik doğrulama bilgilerinin değişimini koruyan kimlik doğrulama sunucusu. <acronym> PEAP </acronym> kimlik doğrulaması, <acronym> EAP-TTLS </acronym> 'den farklıdır, çünkü kullanıcı adını net olarak yayınlar ve şifrelenmiş <acronym> TLS </acronym> tünelinde sadece şifre gönderilir. <acronym> EAP-TTLS </acronym>, hem kullanıcı adı hem de şifre için <acronym> TLS </acronym> tünelini kullanacaktır.
Add the following lines to <filename>/etc/wpa_supplicant.conf</filename> to configure the <acronym>EAP-PEAP</acronym> related settings: <acronym> EAP-PEAP </acronym> ile ilgili ayarları yapılandırmak için <filename> /etc/wpa_supplicant.conf </filename> öğesine aşağıdaki satırları ekleyin:
network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=PEAP <co xml:id="co-peap-eap"/>
identity="test" <co xml:id="co-peap-id"/>
password="test" <co xml:id="co-peap-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-peap-cacert"/>
phase1="peaplabel=0" <co xml:id="co-peap-pha1"/>
phase2="auth=MSCHAPV2" <co xml:id="co-peap-pha2"/>
} 		network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=PEAP <co xml:id="co-peap-eap"/>
identity="test" <co xml:id="co-peap-id"/>
password="test" <co xml:id="co-peap-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-peap-cacert"/>
phase1="peaplabel=0" <co xml:id="co-peap-pha1"/>
phase2="auth=MSCHAPV2" <co xml:id="co-peap-pha2"/>
}
This field contains the parameters for the first phase of authentication, the <acronym>TLS</acronym> tunnel. According to the authentication server used, specify a specific label for authentication. Most of the time, the label will be <quote>client <acronym>EAP</acronym> encryption</quote> which is set by using <literal>peaplabel=0</literal>. More information can be found in <citerefentry><refentrytitle>wpa_supplicant.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Bu alan, kimlik doğrulamanın ilk aşaması olan <acronym> TLS </acronym> tüneli için parametreleri içerir. Kullanılan kimlik doğrulama sunucusuna göre, kimlik doğrulama için belirli bir etiket belirtin. Çoğu zaman etiket, <literal> peaplabel = 0 </literal> kullanılarak ayarlanan <quote> istemci <acronym> EAP </acronym> şifreleme </quote> olur. Daha fazla bilgi <citerefentry><refentrytitle>wpa_supplicant.conf</refentrytitle><manvolnum>5</manvolnum> </citerefentry> 'de bulunabilir.
This field specifies the authentication protocol used in the encrypted <acronym>TLS</acronym> tunnel. In the case of <acronym>PEAP</acronym>, it is <literal>auth=MSCHAPV2</literal>. Bu alan şifreli <acronym> TLS </acronym> tünelinde kullanılan kimlik doğrulama protokolünü belirtir. <acronym> PEAP </acronym> durumunda, <literal> auth = MSCHAPV2 </literal> şeklindedir.
<acronym>WEP</acronym> <acronym>WEP</acronym>
Wired Equivalent Privacy (<acronym>WEP</acronym>) is part of the original 802.11 standard. There is no authentication mechanism, only a weak form of access control which is easily cracked. Kabloluya Eşdeğer Gizlilik (<acronym> WEP </acronym>), orijinal 802.11 standardının bir parçasıdır. Kimlik doğrulama mekanizması yoktur, sadece kolayca kırılan zayıf bir erişim kontrolü biçimi vardır.
<acronym>WEP</acronym> can be set up using <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum></citerefentry>: <acronym> WEP </acronym> <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum> </citerefentry> kullanılarak kurulabilir:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable> \
ssid <replaceable>my_net</replaceable> wepmode on weptxkey <replaceable>3</replaceable> wepkey <replaceable>3:0x3456789012</replaceable></userinput> 		prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable> \
ssid <replaceable>my_net</replaceable> wepmode on weptxkey <replaceable>3</replaceable> wepkey <replaceable>3:0x3456789012</replaceable></userinput>
The <literal>weptxkey</literal> specifies which <acronym>WEP</acronym> key will be used in the transmission. This example uses the third key. This must match the setting on the access point. When unsure which key is used by the access point, try <literal>1</literal> (the first key) for this value. <literal> weptxkey </literal>, iletimde hangi <acronym> WEP </acronym> anahtarının kullanılacağını belirtir. Bu örnek üçüncü anahtarı kullanır. Bu, erişim noktasındaki ayarla eşleşmelidir. Erişim noktası tarafından hangi anahtarın kullanıldığından emin değilseniz, bu değer için <literal> 1 </literal> (ilk anahtar) öğesini deneyin.
The <literal>wepkey</literal> selects one of the <acronym>WEP</acronym> keys. It should be in the format <replaceable>index:key</replaceable>. Key <literal>1</literal> is used by default; the index only needs to be set when using a key other than the first key. <literal> wepkey </literal>, <acronym> WEP </acronym> tuşlarından birini seçer. <replaceable> index: key </replaceable> biçiminde olmalıdır. <literal> 1 </literal> tuşu varsayılan olarak kullanılır; dizinin yalnızca ilk anahtardan başka bir anahtar kullanılırken ayarlanması gerekir.
Replace the <literal>0x3456789012</literal> with the key configured for use on the access point. <literal> 0x3456789012 </literal> öğesini erişim noktasında kullanılmak üzere yapılandırılmış anahtarla değiştirin.

Loading…

User avatar browndie

New translation

FreeBSD Doc / books_handbook — Turkish (tr_TR)

<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
6 months ago
Browse all component changes

Things to check

Unchanged translation

Source and translation are identical

Reset

Glossary

English Turkish (tr_TR)
baud rate baud oranı FreeBSD Doc
broadcast address yayın adresi FreeBSD Doc
dedicated mode özel mod FreeBSD Doc
Ethernet Yerel ağlar (İngilizce: Local Area Network (LAN)) için kullanılan Veri Çerçevesi (İngilizce: Data Frame) tabanlı bilgisayar ağı teknolojileri ailesi FreeBSD Doc
flag bayrak,işaretçi FreeBSD Doc
Internet Service Provider İnternet Servis Sağlayıcısı FreeBSD Doc
legacy port eski bağlantı noktası FreeBSD Doc
manual page el kitabı FreeBSD Doc
media dağıtım ortamı (CD/DVD vb.) FreeBSD Doc
Multicast çok noktaya yayın FreeBSD Doc
Netmask Alt ağ maskesi FreeBSD Doc
network service ağ hizmeti FreeBSD Doc
networking service ağ hizmeti,ağ servisi FreeBSD Doc
parallel port paralel bağlantı noktası FreeBSD Doc
port port (bağlantı noktası) FreeBSD Doc
run çalıştırmak FreeBSD Doc
serial port seri bağlantı noktası FreeBSD Doc
service hizmet FreeBSD Doc
service jail hizmet hapsi FreeBSD Doc
service set identifier servis seti tanımlayıcısı FreeBSD Doc
status durum FreeBSD Doc
to port bağlanmak FreeBSD Doc
USB port USB bağlantı noktası FreeBSD Doc

Source information

Source string comment
(itstool) path: sect5/screen
Flags
no-wrap
Source string location
book.translate.xml:65535
String age
8 months ago
Source string age
a year ago
Translation file
books/tr_TR/handbook.po, string 10741