Translation

(itstool) path: callout/para
English
This field specifies the <acronym>EAP</acronym> method for the connection.
67/740
Context English Turkish (tr_TR) State
The <literal>key_mgmt</literal> line refers to the key management protocol to use. In this example, it is <acronym>WPA</acronym> using <acronym>EAP</acronym> authentication. <literal> key_mgmt </literal> satırı, kullanılacak anahtar yönetimi protokolünü ifade eder. Bu örnekte, <acronym> EAP </acronym> kimlik doğrulaması kullanılarak <acronym> WPA </acronym> kullanılır.
This field indicates the <acronym>EAP</acronym> method for the connection. Bu alan bağlantı için <acronym> EAP </acronym> yöntemini gösterir.
The <literal>identity</literal> field contains the identity string for <acronym>EAP</acronym>. <literal> kimlik </literal> alanı, <acronym> EAP </acronym> için kimlik dizesini içerir.
The <literal>ca_cert</literal> field indicates the pathname of the <acronym>CA</acronym> certificate file. This file is needed to verify the server certificate. <literal> ca_cert </literal> alanı, <acronym> CA </acronym> sertifika dosyasının yol adını belirtir. Bu dosya, sunucu sertifikasını doğrulamak için gereklidir.
The <literal>client_cert</literal> line gives the pathname to the client certificate file. This certificate is unique to each wireless client of the network. The <literal>client_cert</literal> line gives the pathname to the client certificate file. This certificate is unique to each wireless client of the network.
The <literal>private_key</literal> field is the pathname to the client certificate private key file. The <literal>private_key</literal> field is the pathname to the client certificate private key file.
The <literal>private_key_passwd</literal> field contains the passphrase for the private key. <literal> private_key_passwd </literal> alanı, özel anahtarın parolasını içerir.
Then, add the following lines to <filename>/etc/rc.conf</filename>: Ardından, <filename> /etc/rc.conf </filename> öğesine aşağıdaki satırları ekleyin:
The next step is to bring up the interface: Bir sonraki adım arayüzü açmaktır:
<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL 		<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
It is also possible to bring up the interface manually using <citerefentry><refentrytitle>wpa_supplicant</refentrytitle><manvolnum>8</manvolnum></citerefentry> and <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum></citerefentry>. Arabirimi <citerefentry><refentrytitle>wpa_supplicant</refentrytitle><manvolnum>8</manvolnum> </citerefentry> ve <citerefentry><refentrytitle>ifconfig</refentry> 8 < </ manvolnum> </ citerefentry>.
<acronym>WPA</acronym> with <acronym>EAP-TTLS</acronym> <acronym>WPA</acronym> with <acronym>EAP-TTLS</acronym>
With <acronym>EAP-TLS</acronym>, both the authentication server and the client need a certificate. With <acronym>EAP-TTLS</acronym>, a client certificate is optional. This method is similar to a web server which creates a secure <acronym>SSL</acronym> tunnel even if visitors do not have client-side certificates. <acronym>EAP-TTLS</acronym> uses an encrypted <acronym>TLS</acronym> tunnel for safe transport of the authentication data. <acronym> EAP-TLS </acronym> ile, hem kimlik doğrulama sunucusunun hem de istemcinin bir sertifikaya ihtiyacı vardır. <acronym> EAP-TTLS </acronym> ile istemci sertifikası isteğe bağlıdır. Bu yöntem, ziyaretçilerin istemci tarafı sertifikaları olmasa bile güvenli bir <acronym> SSL </acronym> tüneli oluşturan bir web sunucusuna benzer. <acronym> EAP-TTLS </acronym>, kimlik doğrulama verilerinin güvenli taşınması için şifreli bir <acronym> TLS </acronym> tüneli kullanır.
The required configuration can be added to <filename>/etc/wpa_supplicant.conf</filename>: Gerekli yapılandırma <filename> /etc/wpa_supplicant.conf </filename> dosyasına eklenebilir:
network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=TTLS <co xml:id="co-ttls-eap"/>
identity="test" <co xml:id="co-ttls-id"/>
password="test" <co xml:id="co-ttls-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-ttls-cacert"/>
phase2="auth=MD5" <co xml:id="co-ttls-pha2"/>
} 		network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=TTLS <co xml:id="co-ttls-eap"/>
identity="test" <co xml:id="co-ttls-id"/>
password="test" <co xml:id="co-ttls-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-ttls-cacert"/>
phase2="auth=MD5" <co xml:id="co-ttls-pha2"/>
}
This field specifies the <acronym>EAP</acronym> method for the connection. Bu alan, bağlantı için <acronym> EAP </acronym> yöntemini belirtir.
The <literal>identity</literal> field contains the identity string for <acronym>EAP</acronym> authentication inside the encrypted <acronym>TLS</acronym> tunnel. <literal> identity </literal> alanı, şifreli <acronym> TLS </acronym> tüneli içinde <acronym> EAP </acronym> kimlik doğrulaması için kimlik dizesini içerir.
The <literal>password</literal> field contains the passphrase for the <acronym>EAP</acronym> authentication. <literal> parola </literal> alanı, <acronym> EAP </acronym> kimlik doğrulamasının parolasını içerir.
This field specifies the authentication method used in the encrypted <acronym>TLS</acronym> tunnel. In this example, <acronym>EAP</acronym> with MD5-Challenge is used. The <quote>inner authentication</quote> phase is often called <quote>phase2</quote>. Bu alan şifreli <acronym> TLS </acronym> tünelinde kullanılan kimlik doğrulama yöntemini belirtir. Bu örnekte, MD5-Challenge ile birlikte <acronym> EAP </acronym> kullanılmaktadır. <quote> iç kimlik doğrulama </quote> aşamasına genellikle <quote> phase2 </quote> adı verilir.
Next, add the following lines to <filename>/etc/rc.conf</filename>: Ardından, <filename> /etc/rc.conf </filename> öğesine aşağıdaki satırları ekleyin:
<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL 		<prompt>#</prompt> <userinput>service netif start</userinput>
Starting wpa_supplicant.
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
<acronym>WPA</acronym> with <acronym>EAP-PEAP</acronym> <acronym>WPA</acronym> with <acronym>EAP-PEAP</acronym>
<acronym>PEAPv0/EAP-MSCHAPv2</acronym> is the most common <acronym>PEAP</acronym> method. In this chapter, the term <acronym>PEAP</acronym> is used to refer to that method. <acronym> PEAPv0 / EAP-MSCHAPv2 </acronym> en yaygın <acronym> PEAP </acronym> yöntemidir. Bu bölümde, bu yöntemi ifade etmek için <acronym> PEAP </acronym> terimi kullanılmaktadır.
Protected EAP (<acronym>PEAP</acronym>) is designed as an alternative to <acronym>EAP-TTLS</acronym> and is the most used <acronym>EAP</acronym> standard after <acronym>EAP-TLS</acronym>. In a network with mixed operating systems, <acronym>PEAP</acronym> should be the most supported standard after <acronym>EAP-TLS</acronym>. Korumalı EAP (<acronym> PEAP </acronym>), <acronym> EAP-TTLS </acronym> 'e alternatif olarak tasarlanmıştır ve <acronym> EAP-TLS < / kısaltması>. Karışık işletim sistemlerine sahip bir ağda, <acronym> PEAP </acronym>, <acronym> EAP-TLS </acronym> 'dan sonra en çok desteklenen standart olmalıdır.
<acronym>PEAP</acronym> is similar to <acronym>EAP-TTLS</acronym> as it uses a server-side certificate to authenticate clients by creating an encrypted <acronym>TLS</acronym> tunnel between the client and the authentication server, which protects the ensuing exchange of authentication information. <acronym>PEAP</acronym> authentication differs from <acronym>EAP-TTLS</acronym> as it broadcasts the username in the clear and only the password is sent in the encrypted <acronym>TLS</acronym> tunnel. <acronym>EAP-TTLS</acronym> will use the <acronym>TLS</acronym> tunnel for both the username and password. <acronym> PEAP </acronym>, istemci ile istemci arasında şifreli bir <acronym> TLS </acronym> tüneli oluşturarak istemcilerin kimliğini doğrulamak için sunucu tarafı bir sertifika kullandığından <acronym> EAP-TTLS </acronym> 'e benzer. sonraki kimlik doğrulama bilgilerinin değişimini koruyan kimlik doğrulama sunucusu. <acronym> PEAP </acronym> kimlik doğrulaması, <acronym> EAP-TTLS </acronym> 'den farklıdır, çünkü kullanıcı adını net olarak yayınlar ve şifrelenmiş <acronym> TLS </acronym> tünelinde sadece şifre gönderilir. <acronym> EAP-TTLS </acronym>, hem kullanıcı adı hem de şifre için <acronym> TLS </acronym> tünelini kullanacaktır.
Add the following lines to <filename>/etc/wpa_supplicant.conf</filename> to configure the <acronym>EAP-PEAP</acronym> related settings: <acronym> EAP-PEAP </acronym> ile ilgili ayarları yapılandırmak için <filename> /etc/wpa_supplicant.conf </filename> öğesine aşağıdaki satırları ekleyin:
network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=PEAP <co xml:id="co-peap-eap"/>
identity="test" <co xml:id="co-peap-id"/>
password="test" <co xml:id="co-peap-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-peap-cacert"/>
phase1="peaplabel=0" <co xml:id="co-peap-pha1"/>
phase2="auth=MSCHAPV2" <co xml:id="co-peap-pha2"/>
} 		network={
ssid="freebsdap"
proto=RSN
key_mgmt=WPA-EAP
eap=PEAP <co xml:id="co-peap-eap"/>
identity="test" <co xml:id="co-peap-id"/>
password="test" <co xml:id="co-peap-passwd"/>
ca_cert="/etc/certs/cacert.pem" <co xml:id="co-peap-cacert"/>
phase1="peaplabel=0" <co xml:id="co-peap-pha1"/>
phase2="auth=MSCHAPV2" <co xml:id="co-peap-pha2"/>
}
This field contains the parameters for the first phase of authentication, the <acronym>TLS</acronym> tunnel. According to the authentication server used, specify a specific label for authentication. Most of the time, the label will be <quote>client <acronym>EAP</acronym> encryption</quote> which is set by using <literal>peaplabel=0</literal>. More information can be found in <citerefentry><refentrytitle>wpa_supplicant.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Bu alan, kimlik doğrulamanın ilk aşaması olan <acronym> TLS </acronym> tüneli için parametreleri içerir. Kullanılan kimlik doğrulama sunucusuna göre, kimlik doğrulama için belirli bir etiket belirtin. Çoğu zaman etiket, <literal> peaplabel = 0 </literal> kullanılarak ayarlanan <quote> istemci <acronym> EAP </acronym> şifreleme </quote> olur. Daha fazla bilgi <citerefentry><refentrytitle>wpa_supplicant.conf</refentrytitle><manvolnum>5</manvolnum> </citerefentry> 'de bulunabilir.
This field specifies the authentication protocol used in the encrypted <acronym>TLS</acronym> tunnel. In the case of <acronym>PEAP</acronym>, it is <literal>auth=MSCHAPV2</literal>. Bu alan şifreli <acronym> TLS </acronym> tünelinde kullanılan kimlik doğrulama protokolünü belirtir. <acronym> PEAP </acronym> durumunda, <literal> auth = MSCHAPV2 </literal> şeklindedir.
<acronym>WEP</acronym> <acronym>WEP</acronym>
Wired Equivalent Privacy (<acronym>WEP</acronym>) is part of the original 802.11 standard. There is no authentication mechanism, only a weak form of access control which is easily cracked. Kabloluya Eşdeğer Gizlilik (<acronym> WEP </acronym>), orijinal 802.11 standardının bir parçasıdır. Kimlik doğrulama mekanizması yoktur, sadece kolayca kırılan zayıf bir erişim kontrolü biçimi vardır.

Loading…

User avatar browndie

New translation

FreeBSD Doc / books_handbook — Turkish (tr_TR)

This field specifies the <acronym>EAP</acronym> method for the connection.
Bu alan, bağlantı için <acronym> EAP </acronym> yöntemini belirtir.
6 months ago
Browse all component changes

Glossary

English Turkish (tr_TR)
dial-up connection çevirmeli bağlantı FreeBSD Doc
parallel connection paralel bağlantı FreeBSD Doc
remote connection uzak bağlantı FreeBSD Doc
serial connection seri bağlantı FreeBSD Doc

Source information

Source string comment
(itstool) path: callout/para
Source string location
book.translate.xml:65535
String age
8 months ago
Source string age
a year ago
Translation file
books/tr_TR/handbook.po, string 10736