FreeBSD Doc (Archived)/books_handbook — Turkish (tr_TR) @ Weblate: The following examples use the <application>Net-SNMP</application> software (<package>net-mgmt/net-snmp</package>) to query …

The translation is temporarily closed for contributions due to maintenance, please come back later.

Translation

Content

Source string comment (itstool) path: sect2/para

English

The following examples use the <application>Net-SNMP</application> software (<package>net-mgmt/net-snmp</package>) to query a bridge from a client system. The <package>net-mgmt/bsnmptools</package> port can also be used. From the <acronym>SNMP</acronym> client which is running <application>Net-SNMP</application>, add the following lines to <filename>$HOME/.snmp/snmp.conf</filename> in order to import the bridge <acronym>MIB</acronym> definitions:

Turkish (tr_TR)

Needs editing

Context	English	Turkish (tr_TR)	State
	<prompt>#</prompt> <userinput>ifconfig bridge0 private vlan100 private vlan101</userinput>	<prompt>#</prompt> <userinput>ifconfig bridge0 private vlan100 private vlan101</userinput>
	The customers are completely isolated from each other and the full <systemitem class="netmask">/24</systemitem> address range can be allocated without subnetting.	Müşteriler birbirlerinden tamamen yalıtılmış ve tam <systemitem class = "alt ağ maskesi"> / 24 </systemitem> adres aralığı alt ağ olmadan tahsis edilebilir.
	The number of unique source <acronym>MAC</acronym> addresses behind an interface can be limited. Once the limit is reached, packets with unknown source addresses are dropped until an existing host cache entry expires or is removed.	Bir arabirimin arkasındaki benzersiz kaynak <acronym> MAC </acronym> adreslerinin sayısı sınırlanabilir. Sınıra ulaşıldığında, kaynak adresleri bilinmeyen paketler mevcut bir ana bilgisayar önbellek girdisinin süresi doluncaya veya kaldırılana kadar bırakılır.
	The following example sets the maximum number of Ethernet devices for <systemitem class="fqdomainname">CustomerA</systemitem> on <literal>vlan100</literal> to 10:	Aşağıdaki örnek, <literal> vlan100 </literal> üzerindeki <systemitem class = "fqdomainname"> CustomerA </systemitem> için maksimum Ethernet cihazı sayısını 10 olarak ayarlar:
	<prompt>#</prompt> <userinput>ifconfig bridge0 ifmaxaddr vlan100 10</userinput>	<prompt>#</prompt> <userinput>ifconfig bridge0 ifmaxaddr vlan100 10</userinput>
	Bridge interfaces also support monitor mode, where the packets are discarded after <citerefentry><refentrytitle>bpf</refentrytitle><manvolnum>4</manvolnum></citerefentry> processing and are not processed or forwarded further. This can be used to multiplex the input of two or more interfaces into a single <citerefentry><refentrytitle>bpf</refentrytitle><manvolnum>4</manvolnum></citerefentry> stream. This is useful for reconstructing the traffic for network taps that transmit the RX/TX signals out through two separate interfaces. For example, to read the input from four network interfaces as one stream:	Köprü arayüzleri, paketlerin <citerefentry><refentrytitle>bpf</refentrytitle><manvolnum>4</manvolnum> </citerefentry> işleminden sonra atıldığı ve daha fazla işlenmediği monitör modunu da destekler. Bu, iki veya daha fazla arabirimin girişini tek bir <citerefentry><refentrytitle>bpf</refentrytitle><manvolnum>4</manvolnum> </citerefentry> akışına çoğaltmak için kullanılabilir. Bu, RX / TX sinyallerini iki ayrı arabirim üzerinden ileten ağ muslukları için trafiği yeniden yapılandırmak için kullanışlıdır. Örneğin, dört ağ arayüzünden gelen girişi tek akış olarak okumak için:
	<prompt>#</prompt> <userinput>ifconfig bridge0 addm fxp0 addm fxp1 addm fxp2 addm fxp3 monitor up</userinput> <prompt>#</prompt> <userinput>tcpdump -i bridge0</userinput>	<prompt>#</prompt> <userinput>ifconfig bridge0 addm fxp0 addm fxp1 addm fxp2 addm fxp3 monitor up</userinput> <prompt>#</prompt> <userinput>tcpdump -i bridge0</userinput>
	<acronym>SNMP</acronym> Monitoring	<acronym>SNMP</acronym> gözlemleme
	The bridge interface and <acronym>STP</acronym> parameters can be monitored via <citerefentry><refentrytitle>bsnmpd</refentrytitle><manvolnum>1</manvolnum></citerefentry> which is included in the FreeBSD base system. The exported bridge <acronym>MIB</acronym>s conform to <acronym>IETF</acronym> standards so any <acronym>SNMP</acronym> client or monitoring package can be used to retrieve the data.	Köprü arayüzü ve <acronym> STP </acronym> parametreleri, FreeBSD temel sistemine dahil edilen <citerefentry><refentrytitle>bsnmpd</refentrytitle><manvolnum>1</manvolnum> </citerefentry> ile izlenebilir. Dışa aktarılan köprü <acronym> MIB </acronym>, <acronym> IETF </acronym> standartlarına uygundur, böylece verileri almak için herhangi bir <acronym> SNMP </acronym> istemcisi veya izleme paketi kullanılabilir.
	To enable monitoring on the bridge, uncomment this line in <filename>/etc/snmpd.config</filename> by removing the beginning <literal>#</literal> symbol:	Köprüde izlemeyi etkinleştirmek için, başlangıç <literal> # </literal> sembolünü kaldırarak <filename> /etc/snmpd.config </filename> 'de bu satırın işaretini kaldırın:
	begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"	begemotSnmpdModulePath."köprü" = "/usr/lib/snmp_bridge.so"
	Other configuration settings, such as community names and access lists, may need to be modified in this file. See <citerefentry><refentrytitle>bsnmpd</refentrytitle><manvolnum>1</manvolnum></citerefentry> and <citerefentry><refentrytitle>snmp_bridge</refentrytitle><manvolnum>3</manvolnum></citerefentry> for more information. Once these edits are saved, add this line to <filename>/etc/rc.conf</filename>:	Topluluk adları ve erişim listeleri gibi diğer yapılandırma ayarlarının bu dosyada değiştirilmesi gerekebilir. Bkz. <citerefentry><refentrytitle>bsnmpd</refentrytitle><manvolnum>1</manvolnum> </citerefentry><manvolnum> 3 bilgi. Bu düzenlemeler kaydedildikten sonra, bu satırı <filename> /etc/rc.conf </filename> klasörüne ekleyin:
	bsnmpd_enable="YES"	bsnmpd_enable="YES"
	Then, start <citerefentry><refentrytitle>bsnmpd</refentrytitle><manvolnum>1</manvolnum></citerefentry>:	Ardından, <citerefentry><refentrytitle>bsnmpd</refentrytitle><manvolnum>1</manvolnum> </citerefentry> 'i başlatın:
	<prompt>#</prompt> <userinput>service bsnmpd start</userinput>	<prompt>#</prompt> <userinput>service bsnmpd start</userinput>
	The following examples use the <application>Net-SNMP</application> software (<package>net-mgmt/net-snmp</package>) to query a bridge from a client system. The <package>net-mgmt/bsnmptools</package> port can also be used. From the <acronym>SNMP</acronym> client which is running <application>Net-SNMP</application>, add the following lines to <filename>$HOME/.snmp/snmp.conf</filename> in order to import the bridge <acronym>MIB</acronym> definitions:	Aşağıdaki örnekler, bir istemci sisteminden bir köprüyü sorgulamak için <application> Net-SNMP </application> yazılımını (<package> net-mgmt / net-snmp </package>) kullanır. <package> net-mgmt / bsnmptools </package> bağlantı noktası da kullanılabilir. <application> Net-SNMP </application> çalıştıran <acronym> SNMP </acronym> istemcisinden, içe aktarmak için aşağıdaki satırları <filename> $ HOME / .snmp / snmp.conf </filename> öğesine ekleyin. köprü <acronym> MIB </acronym> tanımları:
	mibdirs +/usr/share/snmp/mibs mibs +BRIDGE-MIB:RSTP-MIB:BEGEMOT-MIB:BEGEMOT-BRIDGE-MIB	mibdirs +/usr/share/snmp/mibs mibs +BRIDGE-MIB:RSTP-MIB:BEGEMOT-MIB:BEGEMOT-BRIDGE-MIB
	To monitor a single bridge using the IETF BRIDGE-MIB (RFC4188):	IETF kulanarak tek bir körüyü gözlemlemek için BRIDGE-MIB (RFC4188):
	<prompt>%</prompt> <userinput>snmpwalk -v 2c -c public bridge1.example.com mib-2.dot1dBridge</userinput> BRIDGE-MIB::dot1dBaseBridgeAddress.0 = STRING: 66:fb:9b:6e:5c:44 BRIDGE-MIB::dot1dBaseNumPorts.0 = INTEGER: 1 ports BRIDGE-MIB::dot1dStpTimeSinceTopologyChange.0 = Timeticks: (189959) 0:31:39.59 centi-seconds BRIDGE-MIB::dot1dStpTopChanges.0 = Counter32: 2 BRIDGE-MIB::dot1dStpDesignatedRoot.0 = Hex-STRING: 80 00 00 01 02 4B D4 50 ... BRIDGE-MIB::dot1dStpPortState.3 = INTEGER: forwarding(5) BRIDGE-MIB::dot1dStpPortEnable.3 = INTEGER: enabled(1) BRIDGE-MIB::dot1dStpPortPathCost.3 = INTEGER: 200000 BRIDGE-MIB::dot1dStpPortDesignatedRoot.3 = Hex-STRING: 80 00 00 01 02 4B D4 50 BRIDGE-MIB::dot1dStpPortDesignatedCost.3 = INTEGER: 0 BRIDGE-MIB::dot1dStpPortDesignatedBridge.3 = Hex-STRING: 80 00 00 01 02 4B D4 50 BRIDGE-MIB::dot1dStpPortDesignatedPort.3 = Hex-STRING: 03 80 BRIDGE-MIB::dot1dStpPortForwardTransitions.3 = Counter32: 1 RSTP-MIB::dot1dStpVersion.0 = INTEGER: rstp(2)	<prompt>%</prompt> <userinput>snmpwalk -v 2c -c public bridge1.example.com mib-2.dot1dBridge</userinput> BRIDGE-MIB::dot1dBaseBridgeAddress.0 = STRING: 66:fb:9b:6e:5c:44 BRIDGE-MIB::dot1dBaseNumPorts.0 = INTEGER: 1 ports BRIDGE-MIB::dot1dStpTimeSinceTopologyChange.0 = Timeticks: (189959) 0:31:39.59 centi-seconds BRIDGE-MIB::dot1dStpTopChanges.0 = Counter32: 2 BRIDGE-MIB::dot1dStpDesignatedRoot.0 = Hex-STRING: 80 00 00 01 02 4B D4 50 ... BRIDGE-MIB::dot1dStpPortState.3 = INTEGER: forwarding(5) BRIDGE-MIB::dot1dStpPortEnable.3 = INTEGER: enabled(1) BRIDGE-MIB::dot1dStpPortPathCost.3 = INTEGER: 200000 BRIDGE-MIB::dot1dStpPortDesignatedRoot.3 = Hex-STRING: 80 00 00 01 02 4B D4 50 BRIDGE-MIB::dot1dStpPortDesignatedCost.3 = INTEGER: 0 BRIDGE-MIB::dot1dStpPortDesignatedBridge.3 = Hex-STRING: 80 00 00 01 02 4B D4 50 BRIDGE-MIB::dot1dStpPortDesignatedPort.3 = Hex-STRING: 03 80 BRIDGE-MIB::dot1dStpPortForwardTransitions.3 = Counter32: 1 RSTP-MIB::dot1dStpVersion.0 = INTEGER: rstp(2)
	The <literal>dot1dStpTopChanges.0</literal> value is two, indicating that the <acronym>STP</acronym> bridge topology has changed twice. A topology change means that one or more links in the network have changed or failed and a new tree has been calculated. The <literal>dot1dStpTimeSinceTopologyChange.0</literal> value will show when this happened.	<literal> dot1dStpTopChanges.0 </literal> değeri ikidir, bu da <acronym> STP </acronym> köprü topolojisinin iki kez değiştiğini gösterir. Bir topoloji değişikliği, ağdaki bir veya daha fazla bağlantının değiştiği veya başarısız olduğu ve yeni bir ağacın hesaplandığı anlamına gelir. Bu olduğunda <literal> dot1dStpTimeSinceTopologyChange.0 </literal> değeri gösterilir.
	To monitor multiple bridge interfaces, the private BEGEMOT-BRIDGE-MIB can be used:	çoklu köprü arayüzlerini izlemek için özel BEGEMOT-BRIDGE-MIB kullanılabilir:
	<prompt>%</prompt> <userinput>snmpwalk -v 2c -c public bridge1.example.com</userinput> enterprises.fokus.begemot.begemotBridge BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge0" = STRING: bridge0 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge2" = STRING: bridge2 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge0" = STRING: e:ce:3b:5a:9e:13 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge2" = STRING: 12:5e:4d:74:d:fc BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge0" = INTEGER: 1 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge2" = INTEGER: 1 ... BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge0" = Timeticks: (116927) 0:19:29.27 centi-seconds BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge2" = Timeticks: (82773) 0:13:47.73 centi-seconds BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge0" = Counter32: 1 BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge2" = Counter32: 1 BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge0" = Hex-STRING: 80 00 00 40 95 30 5E 31 BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge2" = Hex-STRING: 80 00 00 50 8B B8 C6 A9	<prompt>%</prompt> <userinput>snmpwalk -v 2c -c public bridge1.example.com</userinput> enterprises.fokus.begemot.begemotBridge BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge0" = STRING: bridge0 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge2" = STRING: bridge2 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge0" = STRING: e:ce:3b:5a:9e:13 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge2" = STRING: 12:5e:4d:74:d:fc BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge0" = INTEGER: 1 BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge2" = INTEGER: 1 ... BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge0" = Timeticks: (116927) 0:19:29.27 centi-seconds BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge2" = Timeticks: (82773) 0:13:47.73 centi-seconds BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge0" = Counter32: 1 BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge2" = Counter32: 1 BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge0" = Hex-STRING: 80 00 00 40 95 30 5E 31 BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge2" = Hex-STRING: 80 00 00 50 8B B8 C6 A9
	To change the bridge interface being monitored via the <literal>mib-2.dot1dBridge</literal> subtree:	<literal> mib-2.dot1dBridge </literal> alt ağacı üzerinden izlenen köprü arabirimini değiştirmek için:
	<prompt>%</prompt> <userinput>snmpset -v 2c -c private bridge1.example.com</userinput> BEGEMOT-BRIDGE-MIB::begemotBridgeDefaultBridgeIf.0 s bridge2	<prompt>%</prompt> <userinput>snmpset -v 2c -c private bridge1.example.com</userinput> BEGEMOT-BRIDGE-MIB::begemotBridgeDefaultBridgeIf.0 s bridge2
	Link Aggregation and Failover	Bağlantı Toplama ve Yük Devretme
	<primary>lagg</primary>	<primary>lagg</primary>
	<primary>failover</primary>	<primary>failover</primary>
	<primary><acronym>FEC</acronym></primary>	<primary><acronym>FEC</acronym></primary>
	<primary><acronym>LACP</acronym></primary>	<primary><acronym>LACP</acronym></primary>
	<primary>loadbalance</primary>	<primary>loadbalance</primary>
	<primary>roundrobin</primary>	<primary>roundrobin</primary>

Loading…

browndie

New translation

FreeBSD Doc (Archived) / books_handbook — Turkish (tr_TR)

English

Turkish (tr_TR)

Aşağıdaki örnekler, bir istemci sisteminden bir köprüyü sorgulamak için <application> Net-SNMP </application> yazılımını (<package> net-mgmt / net-snmp </package>) kullanır. <package> net-mgmt / bsnmptools </package> bağlantı noktası da kullanılabilir. <application> Net-SNMP </application> çalıştıran <acronym> SNMP </acronym> istemcisinden, içe aktarmak için aşağıdaki satırları <filename> $ HOME / .snmp / snmp.conf </filename> öğesine ekleyin. köprü <acronym> MIB </acronym> tanımları:

7 months ago

Browse all component changes

Things to check

XML markup

XML tags in translation do not match source

Reset

Glossary

English	Turkish (tr_TR)
application	uygulama	FreeBSD Doc (Archived)
client	istemci	FreeBSD Doc (Archived)
client	istemci	FreeBSD Doc (Archived)
filename	dosya adı	FreeBSD Doc (Archived)
package	paket program	FreeBSD Doc (Archived)
port	port (bağlantı noktası)	FreeBSD Doc (Archived)
query	sorgu	FreeBSD Doc (Archived)
software	program,yazılım	FreeBSD Doc (Archived)
Software	Yazılım	FreeBSD Doc (Archived)

Source information

Source string comment

(itstool) path: sect2/para

Source string location

book.translate.xml:65535

String age

9 months ago

Source string age

a year ago

Translation file

books/tr_TR/handbook.po, string 11027