Translation

(itstool) path: sect3/para
The wireless device can only be put into hostap mode during the creation of the network pseudo-device, so a previously created device must be destroyed first:
159/1580
Context English Turkish (tr_TR) State
On <systemitem>A</systemitem>: Eşittir <systemitem>A</systemitem>:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
The <literal>adhoc</literal> parameter indicates that the interface is running in <acronym>IBSS</acronym> mode. <literal> geçici </literal> parametresi, arabirimin <acronym> IBSS </acronym> modunda çalıştığını gösterir.
<systemitem>B</systemitem> should now be able to detect <systemitem>A</systemitem>: <systemitem> B </systemitem> artık <systemitem> A </systemitem> 'i algılayabilmelidir:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput>
SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
freebsdap 02:11:95:c3:0d:ac 2 54M -64:-96 100 IS WME
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput>
SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
freebsdap 02:11:95:c3:0d:ac 2 54M -64:-96 100 IS WME
The <literal>I</literal> in the output confirms that <systemitem>A</systemitem> is in ad-hoc mode. Now, configure <systemitem>B</systemitem> with a different <acronym>IP</acronym> address: Çıktıdaki <literal> I </literal>, <sistemitem> A </systemitem> 'nin geçici modda olduğunu doğrular. Şimdi <systemitem> B </systemitem> öğesini farklı bir <acronym> IP </acronym> adresiyle yapılandırın:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
Both <systemitem>A</systemitem> and <systemitem>B</systemitem> are now ready to exchange information. Hem <systemitem> A </systemitem> hem de <systemitem> B </systemitem> artık bilgi alışverişine hazırdır.
FreeBSD Host Access Points FreeBSD Ana Bilgisayar Erişim Noktaları
FreeBSD can act as an Access Point (<acronym>AP</acronym>) which eliminates the need to buy a hardware <acronym>AP</acronym> or run an ad-hoc network. This can be particularly useful when a FreeBSD machine is acting as a gateway to another network such as the Internet. FreeBSD, bir donanım <acronym> AP </acronym> satın alma veya geçici bir ağ çalıştırma ihtiyacını ortadan kaldıran bir Erişim Noktası (<acronym> AP </acronym>) görevi görebilir. Bu, FreeBSD makinesi İnternet gibi başka bir ağa ağ geçidi görevi gördüğünde özellikle yararlı olabilir.
Before configuring a FreeBSD machine as an <acronym>AP</acronym>, the kernel must be configured with the appropriate networking support for the wireless card as well as the security protocols being used. For more details, see <xref linkend="network-wireless-basic"/>. FreeBSD makinesini bir <acronym> AP </acronym> olarak yapılandırmadan önce, çekirdek, kullanılan güvenlik protokollerinin yanı sıra kablosuz kart için uygun ağ desteği ile yapılandırılmalıdır. Daha fazla ayrıntı için bkz. <Xref linkend = "ağ-kablosuz-temel" />.
The <acronym>NDIS</acronym> driver wrapper for <trademark class="registered">Windows</trademark> drivers does not currently support <acronym>AP</acronym> operation. Only native FreeBSD wireless drivers support <acronym>AP</acronym> mode. <Trademark class = "registered"> Windows </trademark> sürücüleri için <acronym> NDIS </acronym> sürücü sarmalayıcısı şu anda <acronym> AP </acronym> işlemini desteklemiyor. Yalnızca yerel FreeBSD kablosuz sürücüleri <acronym> AP </acronym> modunu destekler.
Once wireless networking support is loaded, check if the wireless device supports the host-based access point mode, also known as hostap mode: Kablosuz ağ desteği yüklendikten sonra, kablosuz cihazın hostap modu olarak da bilinen ana bilgisayar tabanlı erişim noktası modunu destekleyip desteklemediğini kontrol edin:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> list caps</userinput>
drivercaps=6f85edc1&lt;STA,FF,TURBOP,IBSS,HOSTAP,AHDEMO,TXPMGT,SHSLOT,SHPREAMBLE,MONITOR,MBSS,WPA1,WPA2,BURST,WME,WDS,BGSCAN,TXFRAG&gt;
cryptocaps=1f&lt;WEP,TKIP,AES,AES_CCM,TKIPMIC&gt;
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> list caps</userinput>
drivercaps=6f85edc1&lt;STA,FF,TURBOP,IBSS,HOSTAP,AHDEMO,TXPMGT,SHSLOT,SHPREAMBLE,MONITOR,MBSS,WPA1,WPA2,BURST,WME,WDS,BGSCAN,TXFRAG&gt;
cryptocaps=1f&lt;WEP,TKIP,AES,AES_CCM,TKIPMIC&gt;
This output displays the card's capabilities. The <literal>HOSTAP</literal> word confirms that this wireless card can act as an <acronym>AP</acronym>. Various supported ciphers are also listed: <acronym>WEP</acronym>, <acronym>TKIP</acronym>, and <acronym>AES</acronym>. This information indicates which security protocols can be used on the <acronym>AP</acronym>. Bu çıkış kartın özelliklerini görüntüler. <literal> HOSTAP </literal> sözcüğü, bu kablosuz kartın bir <acronym> AP </acronym> görevi yapabileceğini doğrular. Çeşitli desteklenen şifreler de listelenmiştir: <acronym> WEP </acronym>, <acronym> TKIP </acronym> ve <acronym> AES </acronym>. Bu bilgi, <acronym> AP </acronym> üzerinde hangi güvenlik protokollerinin kullanılabileceğini gösterir.
The wireless device can only be put into hostap mode during the creation of the network pseudo-device, so a previously created device must be destroyed first: Kablosuz aygıt yalnızca ağ sahte aygıtının oluşturulması sırasında rehin moduna alınabilir, bu nedenle önce oluşturulan bir aygıtın önce imha edilmesi gerekir:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> destroy</userinput> <prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> destroy</userinput>
then regenerated with the correct option before setting the other parameters: daha sonra diğer parametreleri ayarlamadan önce doğru seçenekle yeniden oluşturuldu:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode hostap</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable> mode 11g channel 1</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode hostap</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable> mode 11g channel 1</userinput>
Use <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum></citerefentry> again to see the status of the <filename>wlan0</filename> interface: <filename> wlan0 </filename> arayüzünün durumunu görmek için tekrar <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum> </citerefentry> kullanın:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;hostap&gt;
status: running
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst dtimperiod 1 -dfs
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;hostap&gt;
status: running
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst dtimperiod 1 -dfs
The <literal>hostap</literal> parameter indicates the interface is running in the host-based access point mode. <literal> hostap </literal> parametresi, arabirimin ana bilgisayar tabanlı erişim noktası modunda çalıştığını gösterir.
The interface configuration can be done automatically at boot time by adding the following lines to <filename>/etc/rc.conf</filename>: Arayüz yapılandırması, önyükleme sırasında <filename> /etc/rc.conf </filename> dosyasına aşağıdaki satırlar eklenerek otomatik olarak yapılabilir:
wlans_ath0="wlan0"
create_args_wlan0="wlanmode hostap"
ifconfig_wlan0="inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable> mode 11g channel <replaceable>1</replaceable>"
wlans_ath0="wlan0"
create_args_wlan0="wlanmode hostap"
ifconfig_wlan0="inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable> mode 11g channel <replaceable>1</replaceable>"
Host-based Access Point Without Authentication or Encryption Kimlik Doğrulama veya Şifrelemesiz Ana Bilgisayar Tabanlı Erişim Noktası
Although it is not recommended to run an <acronym>AP</acronym> without any authentication or encryption, this is a simple way to check if the <acronym>AP</acronym> is working. This configuration is also important for debugging client issues. Herhangi bir kimlik doğrulama veya şifreleme olmadan bir <acronym> AP </acronym> çalıştırmanız önerilmez, ancak bu <acronym> AP </acronym> 'un çalışıp çalışmadığını kontrol etmenin basit bir yoludur. Bu yapılandırma aynı zamanda istemci sorunlarının ayıklanması için de önemlidir.
Once the <acronym>AP</acronym> is configured, initiate a scan from another wireless machine to find the <acronym>AP</acronym>: <acronym> AP </acronym> yapılandırıldıktan sonra, <acronym> AP </acronym> öğesini bulmak için başka bir kablosuz makineden bir tarama başlatın:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput>
SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
freebsdap 00:11:95:c3:0d:ac 1 54M -66:-96 100 ES WME
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput>
SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
freebsdap 00:11:95:c3:0d:ac 1 54M -66:-96 100 ES WME
The client machine found the <acronym>AP</acronym> and can be associated with it: İstemci makine <acronym> AP </acronym> 'ı buldu ve onunla ilişkilendirilebilir:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 bmiss 7
scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
roam:rate 5 protmode CTS wme burst
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 bmiss 7
scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
roam:rate 5 protmode CTS wme burst
<acronym>WPA2</acronym> Host-based Access Point <acronym>WPA2</acronym> sunucu erişim noktası

Loading…

The wireless device can only be put into hostap mode during the creation of the network pseudo-device, so a previously created device must be destroyed first:
Kablosuz aygıt yalnızca ağ sahte aygıtının oluşturulması sırasında rehin moduna alınabilir, bu nedenle önce oluşturulan bir aygıtın önce imha edilmesi gerekir:
4 months ago
Browse all component changes

Glossary

English Turkish (tr_TR)
dedicated mode özel mod FreeBSD Doc
device aygıt FreeBSD Doc
device aygıt FreeBSD Doc
device node aygıt düğümü FreeBSD Doc
device node aygıt düğümü FreeBSD Doc
GNOME (GNU Network Object Model Environment) GNU Ağ Nesne Modeli Ortamı FreeBSD Doc
internal network yerel ağ FreeBSD Doc
internal network iç şebeke FreeBSD Doc
network FreeBSD Doc
network card ethernet kartı,ağ kartı FreeBSD Doc
network file system ağ dosya sistemi FreeBSD Doc
network interface ağ arayüzü FreeBSD Doc
network monitoring ağ izleme FreeBSD Doc
network printer ağ yazıcısı FreeBSD Doc
network service ağ hizmeti FreeBSD Doc
Raw device depolama aygıtına doğrudan erişilmesini sağlayan bir karakter aygıtı dosyasıyla ilişkili özel bir tür FreeBSD Doc
raw network sockets ham ağ soketleri FreeBSD Doc
Virtual Private Network Sanal Özel Ağlar FreeBSD Doc

Source information

Source string comment
(itstool) path: sect3/para
Source string location
book.translate.xml:64004
String age
6 months ago
Source string age
a year ago
Translation file
books/tr_TR/handbook.po, string 10464