Translation

(itstool) path: sect2/para
Both <systemitem>A</systemitem> and <systemitem>B</systemitem> are now ready to exchange information.
103/1010
Context English Turkish (tr_TR) State
Replace the <literal>0x3456789012</literal> with the key configured for use on the access point. <literal> 0x3456789012 </literal> öğesini erişim noktasında kullanılmak üzere yapılandırılmış anahtarla değiştirin.
Refer to <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum></citerefentry> for further information. Daha fazla bilgi için <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum> </citerefentry> bölümüne bakın.
The <citerefentry><refentrytitle>wpa_supplicant</refentrytitle><manvolnum>8</manvolnum></citerefentry> facility can be used to configure a wireless interface with <acronym>WEP</acronym>. The example above can be set up by adding the following lines to <filename>/etc/wpa_supplicant.conf</filename>: <citerefentry><refentrytitle>wpa_supplicant</refentrytitle><manvolnum>8</manvolnum> </citerefentry> özelliği, <acronym> WEP </acronym> ile kablosuz bir arayüz yapılandırmak için kullanılabilir. Yukarıdaki örnek, <filename> /etc/wpa_supplicant.conf </filename> klasörüne aşağıdaki satırlar eklenerek ayarlanabilir:
network={
ssid="my_net"
key_mgmt=NONE
wep_key3=3456789012
wep_tx_keyidx=3
}
network={
ssid="my_net"
key_mgmt=NONE
wep_key3=3456789012
wep_tx_keyidx=3
}
Then: Daha sonra:
<prompt>#</prompt> <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput>
Trying to associate with 00:13:46:49:41:76 (SSID='dlinkap' freq=2437 MHz)
Associated with 00:13:46:49:41:76
<prompt>#</prompt> <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput>
Trying to associate with 00:13:46:49:41:76 (SSID='dlinkap' freq=2437 MHz)
İlişkilidir 00:13:46:49:41:76
Ad-hoc Mode Geçici mod
<acronym>IBSS</acronym> mode, also called ad-hoc mode, is designed for point to point connections. For example, to establish an ad-hoc network between the machines <systemitem>A</systemitem> and <systemitem>B</systemitem>, choose two <acronym>IP</acronym> addresses and a <acronym>SSID</acronym>. Geçici mod olarak da adlandırılan <acronym> IBSS </acronym> modu, noktadan noktaya bağlantılar için tasarlanmıştır. Örneğin, <systemitem> A </systemitem> ve <systemitem> B </systemitem> makineleri arasında geçici bir ağ oluşturmak için iki <acronym> IP </acronym> adresi ve bir <acronym> SSID </ kısaltması>.
On <systemitem>A</systemitem>: Eşittir <systemitem>A</systemitem>:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
The <literal>adhoc</literal> parameter indicates that the interface is running in <acronym>IBSS</acronym> mode. <literal> geçici </literal> parametresi, arabirimin <acronym> IBSS </acronym> modunda çalıştığını gösterir.
<systemitem>B</systemitem> should now be able to detect <systemitem>A</systemitem>: <systemitem> B </systemitem> artık <systemitem> A </systemitem> 'i algılayabilmelidir:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput>
SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
freebsdap 02:11:95:c3:0d:ac 2 54M -64:-96 100 IS WME
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode adhoc</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput>
SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
freebsdap 02:11:95:c3:0d:ac 2 54M -64:-96 100 IS WME
The <literal>I</literal> in the output confirms that <systemitem>A</systemitem> is in ad-hoc mode. Now, configure <systemitem>B</systemitem> with a different <acronym>IP</acronym> address: Çıktıdaki <literal> I </literal>, <sistemitem> A </systemitem> 'nin geçici modda olduğunu doğrular. Şimdi <systemitem> B </systemitem> öğesini farklı bir <acronym> IP </acronym> adresiyle yapılandırın:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:d5:43:62
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;adhoc&gt;
status: running
ssid freebsdap channel 2 (2417 Mhz 11g) bssid 02:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst
Both <systemitem>A</systemitem> and <systemitem>B</systemitem> are now ready to exchange information. Hem <systemitem> A </systemitem> hem de <systemitem> B </systemitem> artık bilgi alışverişine hazırdır.
FreeBSD Host Access Points FreeBSD Ana Bilgisayar Erişim Noktaları
FreeBSD can act as an Access Point (<acronym>AP</acronym>) which eliminates the need to buy a hardware <acronym>AP</acronym> or run an ad-hoc network. This can be particularly useful when a FreeBSD machine is acting as a gateway to another network such as the Internet. FreeBSD, bir donanım <acronym> AP </acronym> satın alma veya geçici bir ağ çalıştırma ihtiyacını ortadan kaldıran bir Erişim Noktası (<acronym> AP </acronym>) görevi görebilir. Bu, FreeBSD makinesi İnternet gibi başka bir ağa ağ geçidi görevi gördüğünde özellikle yararlı olabilir.
Before configuring a FreeBSD machine as an <acronym>AP</acronym>, the kernel must be configured with the appropriate networking support for the wireless card as well as the security protocols being used. For more details, see <xref linkend="network-wireless-basic"/>. FreeBSD makinesini bir <acronym> AP </acronym> olarak yapılandırmadan önce, çekirdek, kullanılan güvenlik protokollerinin yanı sıra kablosuz kart için uygun ağ desteği ile yapılandırılmalıdır. Daha fazla ayrıntı için bkz. <Xref linkend = "ağ-kablosuz-temel" />.
The <acronym>NDIS</acronym> driver wrapper for <trademark class="registered">Windows</trademark> drivers does not currently support <acronym>AP</acronym> operation. Only native FreeBSD wireless drivers support <acronym>AP</acronym> mode. <Trademark class = "registered"> Windows </trademark> sürücüleri için <acronym> NDIS </acronym> sürücü sarmalayıcısı şu anda <acronym> AP </acronym> işlemini desteklemiyor. Yalnızca yerel FreeBSD kablosuz sürücüleri <acronym> AP </acronym> modunu destekler.
Once wireless networking support is loaded, check if the wireless device supports the host-based access point mode, also known as hostap mode: Kablosuz ağ desteği yüklendikten sonra, kablosuz cihazın hostap modu olarak da bilinen ana bilgisayar tabanlı erişim noktası modunu destekleyip desteklemediğini kontrol edin:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> list caps</userinput>
drivercaps=6f85edc1&lt;STA,FF,TURBOP,IBSS,HOSTAP,AHDEMO,TXPMGT,SHSLOT,SHPREAMBLE,MONITOR,MBSS,WPA1,WPA2,BURST,WME,WDS,BGSCAN,TXFRAG&gt;
cryptocaps=1f&lt;WEP,TKIP,AES,AES_CCM,TKIPMIC&gt;
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> list caps</userinput>
drivercaps=6f85edc1&lt;STA,FF,TURBOP,IBSS,HOSTAP,AHDEMO,TXPMGT,SHSLOT,SHPREAMBLE,MONITOR,MBSS,WPA1,WPA2,BURST,WME,WDS,BGSCAN,TXFRAG&gt;
cryptocaps=1f&lt;WEP,TKIP,AES,AES_CCM,TKIPMIC&gt;
This output displays the card's capabilities. The <literal>HOSTAP</literal> word confirms that this wireless card can act as an <acronym>AP</acronym>. Various supported ciphers are also listed: <acronym>WEP</acronym>, <acronym>TKIP</acronym>, and <acronym>AES</acronym>. This information indicates which security protocols can be used on the <acronym>AP</acronym>. Bu çıkış kartın özelliklerini görüntüler. <literal> HOSTAP </literal> sözcüğü, bu kablosuz kartın bir <acronym> AP </acronym> görevi yapabileceğini doğrular. Çeşitli desteklenen şifreler de listelenmiştir: <acronym> WEP </acronym>, <acronym> TKIP </acronym> ve <acronym> AES </acronym>. Bu bilgi, <acronym> AP </acronym> üzerinde hangi güvenlik protokollerinin kullanılabileceğini gösterir.
The wireless device can only be put into hostap mode during the creation of the network pseudo-device, so a previously created device must be destroyed first: Kablosuz aygıt yalnızca ağ sahte aygıtının oluşturulması sırasında rehin moduna alınabilir, bu nedenle önce oluşturulan bir aygıtın önce imha edilmesi gerekir:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> destroy</userinput> <prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> destroy</userinput>
then regenerated with the correct option before setting the other parameters: daha sonra diğer parametreleri ayarlamadan önce doğru seçenekle yeniden oluşturuldu:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode hostap</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable> mode 11g channel 1</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable> wlanmode hostap</userinput>
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable> ssid <replaceable>freebsdap</replaceable> mode 11g channel 1</userinput>
Use <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum></citerefentry> again to see the status of the <filename>wlan0</filename> interface: <filename> wlan0 </filename> arayüzünün durumunu görmek için tekrar <citerefentry><refentrytitle>ifconfig</refentrytitle><manvolnum>8</manvolnum> </citerefentry> kullanın:
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;hostap&gt;
status: running
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst dtimperiod 1 -dfs
<prompt>#</prompt> <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
wlan0: flags=8843&lt;UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST&gt; metric 0 mtu 1500
ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g &lt;hostap&gt;
status: running
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
country US ecm authmode OPEN privacy OFF txpower 21.5 scanvalid 60
protmode CTS wme burst dtimperiod 1 -dfs
The <literal>hostap</literal> parameter indicates the interface is running in the host-based access point mode. <literal> hostap </literal> parametresi, arabirimin ana bilgisayar tabanlı erişim noktası modunda çalıştığını gösterir.
The interface configuration can be done automatically at boot time by adding the following lines to <filename>/etc/rc.conf</filename>: Arayüz yapılandırması, önyükleme sırasında <filename> /etc/rc.conf </filename> dosyasına aşağıdaki satırlar eklenerek otomatik olarak yapılabilir:

Loading…

Both <systemitem>A</systemitem> and <systemitem>B</systemitem> are now ready to exchange information.
Hem <systemitem> A </systemitem> hem de <systemitem> B </systemitem> artık bilgi alışverişine hazırdır.
4 months ago
Browse all component changes

Glossary

English Turkish (tr_TR)
No related strings found in the glossary.

Source information

Source string comment
(itstool) path: sect2/para
Source string location
book.translate.xml:63956
String age
6 months ago
Source string age
a year ago
Translation file
books/tr_TR/handbook.po, string 10456