Translation

(itstool) path: figure/title
Scanning for Wireless Access Points
0/350
Context English Turkish (tr_TR) State
If further configuration or special setup is needed, select <guibutton>[ Live CD ]</guibutton> to boot the install media into Live <acronym>CD</acronym> mode.
If the installation is complete, select <guibutton>[ Reboot ]</guibutton> to reboot the computer and start the new FreeBSD system. Do not forget to remove the FreeBSD install media or the computer may boot from it again.
As FreeBSD boots, informational messages are displayed. After the system finishes booting, a login prompt is displayed. At the <prompt>login:</prompt> prompt, enter the username added during the installation. Avoid logging in as <systemitem class="username">root</systemitem>. Refer to <xref linkend="users-superuser"/> for instructions on how to become the superuser when administrative access is needed.
The messages that appeared during boot can be reviewed by pressing <keycap>Scroll-Lock</keycap> to turn on the scroll-back buffer. The <keycap>PgUp</keycap>, <keycap>PgDn</keycap>, and arrow keys can be used to scroll back through the messages. When finished, press <keycap>Scroll-Lock</keycap> again to unlock the display and return to the console. To review these messages once the system has been up for some time, type <command>less /var/run/dmesg.boot</command> from a command prompt. Press <keycap>q</keycap> to return to the command line after viewing.
If <application>sshd</application> was enabled in <xref linkend="bsdinstall-config-serv"/>, the first boot may be a bit slower as the system will generate the <acronym>RSA</acronym> and <acronym>DSA</acronym> keys. Subsequent boots will be faster. The fingerprints of the keys will be displayed, as seen in this example:
Generating public/private rsa1 key pair.
Your identification has been saved in /etc/ssh/ssh_host_key.
Your public key has been saved in /etc/ssh/ssh_host_key.pub.
The key fingerprint is:
10:a0:f5:af:93:ae:a3:1a:b2:bb:3c:35:d9:5a:b3:f3 root@machine3.example.com
The key's randomart image is:
+--[RSA1 1024]----+
| o.. |
| o . . |
| . o |
| o |
| o S |
| + + o |
|o . + * |
|o+ ..+ . |
|==o..o+E |
+-----------------+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
The key fingerprint is:
7e:1c:ce:dc:8a:3a:18:13:5b:34:b5:cf:d9:d1:47:b2 root@machine3.example.com
The key's randomart image is:
+--[ DSA 1024]----+
| .. . .|
| o . . + |
| . .. . E .|
| . . o o . . |
| + S = . |
| + . = o |
| + . * . |
| . . o . |
| .o. . |
+-----------------+
Starting sshd.
Refer to <xref linkend="openssh"/> for more information about fingerprints and <acronym>SSH</acronym>.
FreeBSD does not install a graphical environment by default. Refer to <xref linkend="x11"/> for more information about installing and configuring a graphical window manager.
Proper shutdown of a FreeBSD computer helps protect data and hardware from damage. <emphasis>Do not turn off the power before the system has been properly shut down!</emphasis> If the user is a member of the <systemitem class="groupname">wheel</systemitem> group, become the superuser by typing <command>su</command> at the command line and entering the <systemitem class="username">root</systemitem> password. Then, type <command>shutdown -p now</command> and the system will shut down cleanly, and if the hardware supports it, turn itself off.
Network Interfaces
Configuring Network Interfaces
Next, a list of the network interfaces found on the computer is shown. Select the interface to configure.
Choose a Network Interface
_ external ref='bsdinstall/bsdinstall-configure-network-interface' md5='__failed__'
If an Ethernet interface is selected, the installer will skip ahead to the menu shown in <xref linkend="bsdinstall-configure-net-ipv4"/>. If a wireless network interface is chosen, the system will instead scan for wireless access points:
Scanning for Wireless Access Points
_ external ref='bsdinstall/bsdinstall-configure-wireless-scan' md5='__failed__'
Wireless networks are identified by a Service Set Identifier (<acronym>SSID</acronym>), a short, unique name given to each network. <acronym>SSIDs</acronym> found during the scan are listed, followed by a description of the encryption types available for that network. If the desired <acronym>SSID</acronym> does not appear in the list, select <guibutton>[ Rescan ]</guibutton> to scan again. If the desired network still does not appear, check for problems with antenna connections or try moving the computer closer to the access point. Rescan after each change is made.
Choosing a Wireless Network
_ external ref='bsdinstall/bsdinstall-configure-wireless-accesspoints' md5='__failed__'
Next, enter the encryption information for connecting to the selected wireless network. <acronym>WPA2</acronym> encryption is strongly recommended as older encryption types, like <acronym>WEP</acronym>, offer little security. If the network uses <acronym>WPA2</acronym>, input the password, also known as the Pre-Shared Key (<acronym>PSK</acronym>). For security reasons, the characters typed into the input box are displayed as asterisks.
WPA2 Setup
_ external ref='bsdinstall/bsdinstall-configure-wireless-wpa2setup' md5='__failed__'
Next, choose whether or not an <acronym>IPv4</acronym> address should be configured on the Ethernet or wireless interface:
Choose <acronym>IPv4</acronym> Networking
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv4' md5='__failed__'
There are two methods of <acronym>IPv4</acronym> configuration. <acronym>DHCP</acronym> will automatically configure the network interface correctly and should be used if the network provides a <acronym>DHCP</acronym> server. Otherwise, the addressing information needs to be input manually as a static configuration.
Do not enter random network information as it will not work. If a <acronym>DHCP</acronym> server is not available, obtain the information listed in <xref linkend="bsdinstall-collect-network-information"/> from the network administrator or Internet service provider.
If a <acronym>DHCP</acronym> server is available, select <guibutton>[ Yes ]</guibutton> in the next menu to automatically configure the network interface. The installer will appear to pause for a minute or so as it finds the <acronym>DHCP</acronym> server and obtains the addressing information for the system.
Choose <acronym>IPv4</acronym> <acronym>DHCP</acronym> Configuration
_ external ref='bsdinstall/bsdinstall-configure-network-interface-ipv4-dhcp' md5='__failed__'

Loading…

No matching activity found.

Browse all component changes

Glossary

English Turkish (tr_TR)
access erişim,erişmek FreeBSD Doc
administrative access yönetici erişimi FreeBSD Doc
Discretionary Access Control (DAC) İsteğe Bağlı Erişim Kontrolü FreeBSD Doc
mandatory access control zorunlu erişim denetimi FreeBSD Doc
mount point bağlama noktası FreeBSD Doc
mount point takma noktası FreeBSD Doc
privileged access ayrıcalıklı erişim FreeBSD Doc
scan taramak FreeBSD Doc

Source information

Source string comment
(itstool) path: figure/title
Source string location
book.translate.xml:5389
String age
6 months ago
Source string age
a year ago
Translation file
books/tr_TR/handbook.po, string 789