Unit Instance

HTTP 200 OK
Allow: GET, PUT, PATCH, DELETE, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "translation": "https://translate-dev.freebsd.org/api/translations/freebsd-doc/articles_serial-uart/en/?format=api",
    "source": [
        "You need to decouple the IRQ drivers for the two UARTs, so that the IRQ line of the board only goes up if (and only if) one of the UARTs asserts a IRQ, and stays low otherwise. The solution was proposed by Joerg Wunsch <email>j@ida.interface-business.de</email>: To solder up a wired-or consisting of two diodes (Germanium or Schottky-types strongly preferred) and a 1 kOhm resistor. Here is the schematic, starting from the 4 by 3 jumper field above:"
    ],
    "previous_source": "",
    "target": [
        "You need to decouple the IRQ drivers for the two UARTs, so that the IRQ line of the board only goes up if (and only if) one of the UARTs asserts a IRQ, and stays low otherwise. The solution was proposed by Joerg Wunsch <email>j@ida.interface-business.de</email>: To solder up a wired-or consisting of two diodes (Germanium or Schottky-types strongly preferred) and a 1 kOhm resistor. Here is the schematic, starting from the 4 by 3 jumper field above:"
    ],
    "id_hash": -8839499477048413306,
    "content_hash": -8839499477048413306,
    "location": "article.translate.xml:2230",
    "context": "",
    "note": "(itstool) path: sect2/para",
    "flags": "",
    "labels": [],
    "state": 100,
    "fuzzy": false,
    "translated": true,
    "approved": false,
    "position": 423,
    "has_suggestion": false,
    "has_comment": false,
    "has_failing_check": false,
    "num_words": 77,
    "source_unit": "https://translate-dev.freebsd.org/api/units/101722/?format=api",
    "priority": 100,
    "id": 101722,
    "web_url": "https://translate-dev.freebsd.org/translate/freebsd-doc/articles_serial-uart/en/?checksum=0553ca0f2e473386",
    "url": "https://translate-dev.freebsd.org/api/units/101722/?format=api",
    "explanation": "",
    "extra_flags": "",
    "pending": false,
    "timestamp": "2019-10-20T12:18:28.205857Z"
}