Units API.

See the Weblate's Web API documentation for detailed description of the API.

GET /api/units/1273552/?format=api
HTTP 200 OK
Allow: GET, PUT, PATCH, DELETE, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "translation": "https://translate-dev.freebsd.org/api/translations/documentation/articlesserial-uart_index/fr_FR/?format=api",
    "source": [
        "Modem Control Register (MCR) +\nBit 7 -> Reserved, always 0. +\nBit 6 -> Reserved, always 0. +\nBit 5 -> Reserved, always 0. +\nBit 4 -> Loop-Back Enable. When set to \"1\", the UART transmitter and receiver are internally connected together to allow diagnostic operations. In addition, the UART modem control outputs are connected to the UART modem control inputs. CTS is connected to RTS, DTR is connected to DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD. +\nBit 3 -> OUT 2. An auxiliary output that the host processor may set high or low. In the IBM PC serial adapter (and most clones), OUT 2 is used to tri-state (disable) the interrupt signal from the 8250/16450/16550 UART. +\nBit 2 -> OUT 1. An auxiliary output that the host processor may set high or low. This output is not used on the IBM PC serial adapter. +\nBit 1 -> Request to Send (RTS). When set to \"1\", the output of the UART -RTS line is Low (Active). +\nBit 0 -> Data Terminal Ready (DTR). When set to \"1\", the output of the UART -DTR line is Low (Active). +"
    ],
    "previous_source": "",
    "target": [
        ""
    ],
    "id_hash": 1557505970373954861,
    "content_hash": 1557505970373954861,
    "location": "documentation/content/en/articles/serial-uart/_index.adoc:788",
    "context": "",
    "note": "type: Table",
    "flags": "no-wrap",
    "labels": [],
    "state": 0,
    "fuzzy": false,
    "translated": false,
    "approved": false,
    "position": 289,
    "has_suggestion": false,
    "has_comment": false,
    "has_failing_check": false,
    "num_words": 200,
    "source_unit": "https://translate-dev.freebsd.org/api/units/1273020/?format=api",
    "priority": 100,
    "id": 1273552,
    "web_url": "https://translate-dev.freebsd.org/translate/documentation/articlesserial-uart_index/fr_FR/?checksum=959d5f6d93b08d2d",
    "url": "https://translate-dev.freebsd.org/api/units/1273552/?format=api",
    "explanation": "",
    "extra_flags": "",
    "pending": false,
    "timestamp": "2022-02-03T10:29:36.893796Z"
}